Boiler Pipe

Qısa Təsvir:


  • Açar sözlər (bununda): Qazan Seamless Tube, sorunsuz Qazan Tube, Boiler Pipe
  • Ölçü: OD: 0.84 '' ~ 28 '' (21.3 ~ 711mm) WT: 0.091 '' ~ 1,575 '' (2.3 ~ 40mm) BOY: Sabit Length (5.8 / 6 / 11,8 / 12 mtr), SRL DRL
  • Standard & Grade: ASTM A179, ASTM A192, ASTM A210 etc
  • Bitir: Square / Plain başa çatıb (düz cut kəsilmiş gördüm, məşəl cut) Beveled / Yivli sona çatdı
  • Çatdırılma: 30 gün ərzində və sifariş miqdarı asılıdır
  • Payment: TT, LC, OA, D / P
  • Qablaşdırma: Toplu In / undled, takıldığından Plastik Caps, Waterproof Paper bükülmüş
  • Istifadə: Boiler borular
  • təsvir

    spesifikasiya

    standart

    Painting & Coating

    Packing & Loading

    Boiler borular sorunsuz boru biridir. üsulları istehsalı sorunsuz boru kimi eyni, lakin bu polad boruların istehsalı üçün ciddi tələbləri var. temperatur səviyyəsinə görə, qazan boru general qazan borular və yüksək təzyiq qazan boru bölünür.

    Production üsulları:
    ① general boiler tube temperature is below 450 ℃, using hot-rolled pipe or cold drawn tube manufacture steel pipe.
    ② high-pressure boiler tube is used often in conditions of high temperature and high pressure pipe, the effect of high temperature flue gas and water vapor, oxidation and corrosion. Steel pipe with high rupture strength, high resistance to oxygen corrosion and have good organizational stability.

    Boiler borular məqsədləri:
    ① general boiler tubes is mainly used to manufacture water wall tubes, tubes in boiling water and super heated steam pipe, super heated steam locomotive boiler tubes, large and small smoke pipe and pipe arch brick.
    ② high-pressure boiler tube is mainly used to manufacture high pressure and ultra-high pressure boiler super heater tubes, reheat tubes, airway, the main steam pipe.

    Kateqoriya:
    Ümumi qazan borular və yüksək təzyiq qazan boru qazan borular yüksək temperatur performans məruz qalır. Onların istifadəsi görə ümumiyyətlə Boiler borular, və ya yüksək təzyiq qazan borular polad boru bir sıra bölünə bilər.


  • Əvvəlki:
  • Next:

  • Boiler Pipe-01 Boiler Pipe-02

    Standards and material for steel pipe is available at carbon, alloy, and stainless steel material.
    Carbon steel: ASTM/ASME A/SA 106, ASTM A179, ASTM A192, ASTM/ASME A/SA 210, ASTM A333 Gr 1, 6,7 to Gr 9,
    Alloy steel: ASTM/ASME A/SA 213 T1, T2, T5, T9, T11, T12, T22, T91, T92; ASTM A335 P1, P2, P5, P9, P11, P12, P22, P91, P92
    Stainless Steel: ASTM A268, ASTM A213, TP304/L, TP316/L, 310S,309S,317,317L,321,321H, and duplex stainless steel material etc.
    Common Sizes: OD from 6mm to 1240mm, thickness from 1mm to 50mm
    Types: Straight boiler pipe, and U boiler steel pipe for tube exchanger bundle.
    These standards specify the classification, size, shape, weight and allowable deviation, technical requirements, inspection and test, packaging, marking and quality certificate of seamless steel tubes for boiler.

    Standards:

    GB(Chinese National standards)
    (1)GB 3087: Seamless steel tubes for low and medium pressure boiler
    (2)GB 5310: Seamless steel tube for high pressure boiler
    (3)GB 13296: Seamless steel tubes for boilers and heat exchangers
    (4)GB 6479: Seamless steel tubes for high-pressure chemical fertilizer equipment
    (5)GB 9948: Seamless steel tubes for petroleum cracking
    ASME(American society of mechanical engineers)
    (1)ASME SA-106: Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
    (2)ASME SA-192M: Seamless Carbon Steel Boiler Tubes for High Pressure
    (3)ASME SA-209M: Seamless carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
    (4)ASME SA-210M: Seamless Medium-carbon Steel Boiler and Superheater Tubes
    (5)ASME SA-213M: Seamless ferritic and austenitic alloy steel boiler, superheater and heat exchanger tubes
    (6)ASME SA178: Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater
    ASTM(Chinese National standards)
    (1)ASTM A213: Seamless ferritic and austenitic alloy steel boiler, superheater and heat exchanger tubes
    (2)SA213-T2: ASME SA213 T2 has allowable stresses listed up to 1000F in the ASME Boiler Code.
    (3)SA213-T9
    (4)SA213-T12: Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, Heat-Exchanger Tubes.
    (5)SA213-T11: The tubes are used in heat exchangers, super heaters and in boilers.
    (6)SA213-T22: ASM T22 Boiler Tube is a high temperature tolerance tube that is used in acidic and corrosive environments such as the hydrochloric processing and in aluminum chloride catalyst involving applications.
    (7)ASTM A 106M: Seamless Carbon Steel Pipe for High-Temperature Service
    (8)ASTM A192M: Seamless Carbon Steel Boiler Tubes for High Pressure
    (9)ASTM A210M: Seamless Medium-carbon Steel Boiler and Superheater Tubes
    (10)ASTM A 335M: Seamless ferritic alloy-steel pipe for high-temperature servic
    EN(Deutsche industrie normen)
    EN 10216-2 : Seamless steel tubes for pressure purposes
    DİN
    DIN 17175:Seamless Tubes of Heat-resistant Steels – Technical Conditions of Delivery
    JIS

    (1)JIS G3461: Carbon steel boiler and heat exchanger tubes
    (2)JIS G3462: Alloy steel boiler and heat exchanger tubes
    (3)JIS G3463: Stainless Steel for Boiler and Heat Exchanger Tubes

    STAINLESS STEELS

    SA213-T304:– The SA 213 Tp 304 Material consists of 18% chromium and carbon, manganese, phosphorus, sulfur, silicon and nickel in the composition.

    SA213-T316: – SA213 TP316 Tube is a material standard for heat exchanger tubes that are made from 316 austenitic stainless steel.

    SA213-TP321 & 347– SA213 TP321 is a specification of heat exchanger tubes that are made from the 321 austenitic stainless steel.

    Bare, Yüngül Mazlı, Qara / Qırmızı / Sarı Painting, Sink / Anti-aşındırıcı Coating

    Standard Marking

    steel pipe packing1

    Standard Packing
    boiler steel pipe package