Sekwere Pipe
Sebopeho:
Hollow Karolos: Sekwere, Rectangular, Round, Triangular, Hexagonal, Eliptical Hollow likarolo
Sekafola
Tšebeliso:
Likarolo tse Hollow:
Kaho: Sebopeho sa Holo, Sea Trestle, Sebopeho sa Boema-fofane, Kaho ea Likepe, Liforeimi tsa Mecha ea Tšireletso, Menyako ea Karache, Matlafatso a Liner tsa Menyako ea Tšepe le Windows, Mabota a Karohano ea Ka hare, Mehaho ea Cable Bridge le Balebeli ba Tšireletseho ba Expressway, Balustrade, Mokhabiso, Bolulo, Lipeipi tsa Mekhabiso.
Likarolo tsa Likoloi: Nyeoe ea Koloi,Moetso oa Koloi le Libese, Likoloi
Temo: Thepa ea Temo
Indasteri: Mechini, Solar Stent, Tšimo ea Oli ea Offshore, Thepa ea Morafo, Lisebelisoa tsa Electromechanical Hardware, , Boenjiniere bo boima, Meepo le Lisebelisoa, Boenjiniere ba Ts'ebetso, Ts'ebetso ea Lisebelisoa, Likarolo tsa Mechanical
Sephethephethe: Litšepe tse Tsamaeang, Menyako e Roll-up, Guardrail, Sebopeho sa Plaza, Matshwao, Thepa ea 'mila, Fense
Polokelo ea Lintho: Liraka tsa Supermarket, Lijana, Liindasteri tsa Lipalangoang, Kaho ea Khoebo
Tse ling: Lisebelisoa tsa Lipapali, Thepa ea Boithapollo, Thepa ea Thepa, Thepa ea Sekolo
Tube ea Scaffolding:
Material Storage Racks, Pallets, Hydraulic Platforms, Trusses, Columns, Purlins, Greenhouse Stands Towers
Boemo ba Boleng:
Likarolo tse Hollow:
GB/T 13793 Longitudinal motlakase khanyetso welded tšepe methapo
GB/T 6728 Cold e thehile likarolo tse se nang letho tsa tšepe bakeng sa sebopeho se akaretsang-Litekanyo, libopeho, boima le ho kheloha ho lumelletsoeng
ASTM A500 Cold e Thehiloeng ka Ts'epe ea tšepe e sa koaeloang le e se nang Mokoetla ea Mohaho oa Ts'epe ea Motlakase ho Round and Shapes
Tlhaloso e Tloaelehileng ea ASTM A 53 bakeng sa Pipe, Tšepe, E Ntšo le e Chesang, e Koetsoeng ka Zinc, e Welded ebile ha e Seamless
TS EN 10210 Likarolo tse chesang tse phethiloeng tse se nang alloy le litšepe tse ntle tsa lijo-thollo
TS EN 10219 Cold e entsoe ka likarolo tse sa koaetsoeng tse entsoeng ka tšepe le litšepe tse ntle tsa lijo-thollo.
JIS G 3466 Carbon steel Square bakeng sa merero e akaretsang ea meralo
BS 1387 Steel Tubes bakeng sa tšebeliso ea Metsi, Khase, Moea le Mouoane
BS 6323 KAROLO 5 LITUBE TSA TŠEPE TSE SA THUSANG LE TSE TŠEBELETSOENG BAKENG SA MOSEBETSI OA MOSEBETSI OA MOSEBETSI LE OA KAKARETSO OA MOSEBETSI OA
IS : 1161 Steel Tubes Bakeng sa Morero oa Sebopeho le lipalo tsa Motlakase.
IS: 3601 li-tubes tsa tšepe bakeng sa merero ea mochini le ea boenjiniere ka kakaretso.
IS: 3074 li-tubes tsa tšepe bakeng sa morero oa Koloi.
IS : 4923 Li-tubes tsa tšepe bakeng sa likarolo tse Hollow tse sebelisoang meahong
DIN 1626 LITHUPU TSE KHALETSENG TSA LITŠEPI TSE SENG TSA ALOY LE
LIEKETSENG TŠEBELETSO E KHETHEHILENG
DIN 2394 LITABA TSA TŠEPE TSE TŠEELETSENG LE TSA SIZED PRECISION
Tube ea Scaffolding:
GB 15831 Steel tube scaffold couplers
TS EN 39 Li-tubes tsa tšepe tse hlephileng bakeng sa li-tube le li-scaffolds tse peli
BS 1139 scaffolding ea tšepe
Sehlopha sa tšepe:
GB/T 13793, GB/T 6728, GB 15831:
Q195, Q215, Q235, Q275, Q295, Q345, 08F, 08, 08AL, 08F, 10F, 10, HG5, DF08
EN 10210, EN 10219, BS 1387: S185, S235, S235JR, S235 G2H, S275, S275JR, S355JRH, S355J2H, St12, St13, St14, St33 St34 St,3ST7
ASTM A500, ASTM A 53: Gr.A, Gr B, Gr C, Gr.D, DC01, DC03, 1008, 1010
JIS G 3466: SS330, SS440, SS490, SPHD, SPHE
Tshebetso: ERW le Seamless
Boholo:
Likarolo tse Hollow:
Sekwere: 10 mmx10mm - 500 mmx500mm
Retangular: 10mm x 20mm - 600mmx400mm
Potoloho: 1/8″ - 4″
Botenya ba Lerako: 0.5 - 20.0mm
Bolelele: 0.3 mtr - 18 mtr joalo ka ha moreki a hlokahala
Tube ea Scaffolding:
Kantle bophara: 38mm, 42mm, 48.3mm-48.6mm
Botenya ba Lerako: 2.0mm, 2.5mm, 2.75mm, 3.0mm, 3.25mm, 3.85mm, 4.0mm
Bolelele: 0.3mtr -18 mtr
Tshebetso:
Seamless: Ho Chesa, Ho Fumaneha Haholo
Tse cheselitsoeng: ERW, HFW
Ho roala: Sekoti se kentsoeng ka mollo, se entsoeng ka motlakase
Lisebelisoa tse so ntlafatsoe:
E se nang Seam: Pipe Billet( E chesang, kapa Con-casting), Pipe ea 'Mè
E tšehelitsoeng: Khoele ea Tšepe e Chesang (HRC) , Cold Rolled Steel Coil (CRC), Mohatla oa Tšepe o okisitsoeng pele
Qetello: Sekhao se sekoere, Burr se tlositsoe
Bokaholimo: E tlotsitsoeng hanyenyane, Dip e chesang e kenngoe ka masenke, Electro galvanized, Black
Kalafo ea Mocheso: E Khanyang e Khanyang, E Ntšoe E Ntšo
Ho paka: Li-plug tsa polasetiki lipheletsong ka bobeli, li-hexagonal bundles tsa max.2,000kg e nang le likhoele tse 'maloa tsa tšepe, Li-tag tse peli holim'a bongata bo bong le bo bong, E phuthetsoe ka pampiri e sa keneleng metsi, letsoho la PVC, le lesela la mokotla le likhoele tse 'maloa tsa tšepe.
Teko: Tlhahlobo ea Karolo ea Lik'hemik'hale, Mechanical Properties (Matla a ho qetela a thata, chai
matla, Elongation), Thepa ea Tekheniki (Teko e bataletseng, Teko ea ho Flaring, Teko ea ho Kobeha, Teko ea boima, Teko ea ho phatloha, Teko ea Boipheliso joalo-joalo), Tlhahlobo ea Boholo bo Bokantle.
Setifikeiti sa Teko ea Mill: EN 10204/3.1B
Bongata ba li-square tubes
| Boholo (mm) | Botenya ba Lerako (mm) | Boholo (mm) | Botenya ba Lerako (mm) |
| 20*20 | 1.2 | 70*70 60*80 100*40 | 1.8 |
| 1.3 | 2 | ||
| 1.4-1.5 | 2.2 | ||
| 1.7 | 2.3 | ||
| 1.8 | 2.5-4.0 | ||
| 2 | 4.5-5.0 | ||
| 2.2 | 5.5-5,75 | ||
| 2.3 | 75*75 60*90 100*50 | 1.8 | |
| 2.5-2,75 | 2 | ||
| 25*25 20*30 | 1.2 | 2.2 | |
| 1.3 | 2.3 | ||
| 1.5 | 2.5-4.0 | ||
| 1.7 | 4.5-5.0 | ||
| 1.8 | 5.5-5,75 | ||
| 2 | 80*80 100*60 100*80 120*60 | 2 | |
| 2.3-2.3 | 2.2 | ||
| 2.5-3.0 | 2.3 | ||
| 30*30 30*40 25*40 20*40 | 1 | 2.5-4.0 | |
| 1.2 | 4.5-5.0 | ||
| 1.3 | 5.5-5,75 | ||
| 1.5 | 7.5-7.75 | ||
| 1.7 | 100*100 120*80 | 2 | |
| 1.8 | 2.2 | ||
| 2 | 2.3 | ||
| 2.2 | 2.5-5.0 | ||
| 2.3 | 5.5-5,75 | ||
| 2.5 * 2,75 | 7.5-7.75 | ||
| 3 | 120*120 140*80 150*100 160*80 | 2.5 | |
| 40*40 30*50 25*50 | 1.2 | 2.75 | |
| 1.3 | 3 | ||
| 1.4-1.5 | 3.25-5.0 | ||
| 1.7 | 5.5-7.0 | ||
| 1.8 | 7.5-7.75 | ||
| 2 | 140*140 150*150 200*100 | 3.5-4.0 | |
| 2.2-2.3 | 4.5-5.0 | ||
| 2.5-4.0 | 5.25-7.0 | ||
| 50*50 60*40 30*60 40*50 | 1.5 | 7.5-7.75 | |
| 1.7 | 160*160 180*180
| 3 | |
| 1.8 | 3.5 | ||
| 2 | 3.75 | ||
| 2.2 | 4.0-5.0 | ||
| 2.3 | 5.25-5,75 | ||
| 2.5 * -4.0 | 7.5-7.75 | ||
| 4.25-5.0 | 60*60 40*80 75*75 50*70 50*80 | 2.3 | |
| 60*60 40*80 75*45 50*70 50*80 | 1.5 | 2.5-4.0 | |
| 1.7 | 4.25-5.0 | ||
| 1.8 | 5.5-5,75 | ||
| 2 | / | ||
| 2.2-2.3 | / |
Maemo a Boleng a fumanehang
ASTM A500 Cold e Thehiloeng ka Ts'epe ea tšepe e sa koaeloang le e se nang Mokoetla ea Mohaho oa Ts'epe ea Motlakase ho Round and Shapes
TS EN 10210 Likarolo tse chesang tse phethiloeng tse se nang alloy le litšepe tse ntle tsa lijo-thollo
TS EN 10219 Cold e entsoe ka likarolo tse sa koaetsoeng tse entsoeng ka tšepe le litšepe tse ntle tsa lijo-thollo.
ASTM A53 e sebelisoa e le tšepe ea meralo kapa bakeng sa lipeipi tsa khatello e tlase
Standard Corner Radius(Boholo ba Sebopeho:)
Max.3 x Botenya ba Lebota ka Lebitso
| Boholo ba Mechini | Boholo ba Sebopeho | ||
| Kholo ka ho Fetisisa Nominal Outside Dimension | Kantle ho Mamello Mahlakoreng 'ohle a Likhutlong | Kholo ka ho Fetisisa Nominal Outside Dimension | Kantle ho Mamello Mahlakoreng 'ohle a Likhutlong |
| 3/16 ho isa ho 5/8 | ± 0.004 | 2 1/2 le tlase | ± 0.020 |
| ho feta 5/8 ho isa ho 1 1/8 | ± 0.005 | ho feta 2 1/2 ho isa ho 3 1/2 | ± 0.020 |
| ho feta 1 1/8 ho isa ho 1 1/2 | ± 0.006 | ho feta 3 1/2 ho isa ho 5 1/2 | ± 0.030 |
| ho feta 1 1/2 ho 2 | ± 0.008 | ho feta 5 1/2 | ± 1% |
| ho feta 2 ho ea ho 3 | ± 0.010 | ||
| ho feta 3 ho isa ho 4 | ± 0.020 | ||
| ho tloha ho 4 ho ea ho 6 | ± 0.020 | ||
| ho tloha ho 6 ho isa ho 8 | ± 0.025 | ||
Ho otloloha
Boholo ba Mechini: Max.1/16 ″ ka maoto a 3
Boholo ba Sebopeho: Max.1/8″ x Palo ea maoto a bolelele bohle e arotsoeng ka 5
Botenya ba Lerako
Boholo ba Mechini le Boqapi: ± 10% ea Botenya ba Lebota ka Lebitso
Squareness of Mahlakore
Boholo ba Mechini: Max: ± b = cx 0.006″
b = Mamello bakeng sa kantle ho lisekoere
c = Boemo bo boholo ba kantle ho lifolete
Boholo ba Sebopeho: Mahlakore a haufi a ka kheloha ho 90 ° ka ± 2 °
Maximum Twist (Boholo ba Mechini le Sebopeho)
| E kholo ka ho fetisisa Dimension, lisenthimithara | Max.Sotha*, lisenthimithara |
| ho feta 1/2 ho isa ho 1 1/2 | 0.050 |
| ho feta 1 1/2 ho isa ho 2 1/2 | 0.062 |
| ho feta 2 1/2 ho isa ho 4 | 0.075 |
| ho tloha ho 4 ho ea ho 6 | 0.087 |
| ho tloha ho 4 ho ea ho 8 | 0.100 |
Convexity & Concavity(Boholo ba Mechini le Sebopeho)
| E kholo ka ho fetisisa Nominal OD, Inches | Mamello ± lisenthimithara |
| 2 1/2 le tlase | ± 0.010 |
| ho feta 2 1/2 ho isa ho 4 | ± 0.015 |
| ho tloha ho 4 ho ea ho 8 | ± 0.025 |
Structural Tubing A 500 Litlhokahalo
| Mephato | Lik'hemik'hale | Ea nama | ||||||
| C Max.% | Mong Max.% | P Max.% | S Max.% | Ke Max.% | Matla a tsitsitseng, min.psi | Ho hlahisa matla, min.psi | Elongation ka 2 in. | |
| Sehlopha sa B | 0.26 | / | 0.04 | 0.05 | 0.20 | 58,000 | 46,000 | 23 |
| Mophato C | 0.23 | 1.35 | 0.04 | 0.05 | 0.20 | 62,000 | 50,000 | 21 |
Khanya Annealed, Black Annealed
Li-plug tsa polasetiki lipheletsong ka bobeli, li-hexagonal bundles tsa max.2,000kg e nang le likhoele tse 'maloa tsa tšepe, Li-tag tse peli holim'a bongata bo bong le bo bong, E phuthetsoe ka pampiri e sa keneleng metsi, letsoho la PVC, le lesela la mokotla le likhoele tse 'maloa tsa tšepe.
Tlhahlobo: Tlhahlobo ea Karolo ea Lik'hemik'hale, Lisebelisoa tsa Mechanical
