EN 10216-1: Caighdeáin an AE
EN 10216-2: Caighdeáin an AE
Cuspóir:
Chun an coirepíopaí, píopaí tobac, feadáin téitheoir super, feadáin réamh-téitheoir aer.
Tar éis comhairliúcháin is féidir, a sholáthar freisin gráid eile de phíobáin déanta as cruach.
Airíonna meicniúla:
| Caighdeán | Grád | Neart teanntachta (MPa) | Neart toraidh (MPa) | Fadú (%) |
| EN10216-1 | lch 195 | 320～440 | ≥195 | ≥27 |
| P235 | 360～500 | ≥235 | ≥25 | |
| P265 | 410～570 | ≥265 | ≥23 | |
| EN10216-2 | P195GH | 320～440 | ≥195 | ≥27 |
| P235GH | 360～500 | ≥235 | ≥25 | |
| P265GH | 410～570 | ≥265 | ≥23 | |
| 13CrMo4-5 | 440～590 | ≥290 | ≥22 | |
| 10CrMo9-10 | 480～630 | ≥280 | ≥22 |
Comhdhéanamh ceimiceach:
| Caighdeán | Grád | Comhdhéanamh Ceimiceach | |||||||||
| C | Si | Mn | P | S | Cr | Mo | Cu | Ni | V | ||
| EN10216-1 | lch 195 | ≤0.13 | ≤0.35 | ≤0.70 | ≤0.025 | ≤0.020 | ≤0.30 | ≤0.06 | ≤0.30 | ≤0.30 | / |
| P235 | ≤0.16 | ≤0.35 | ≤1.20 | ≤0.025 | ≤0.020 | ≤0.30 | ≤0.06 | ≤0.30 | ≤0.30 | / | |
| P265 | ≤0.20 | ≤0.40 | ≤1.40 | ≤0.025 | ≤0.020 | ≤0.30 | ≤0.06 | ≤0.30 | ≤0.30 | / | |
| EN10216-2 | P195GH | ≤0.13 | ≤0.35 | ≤0.70 | ≤0.025 | ≤0.020 | ≤0.30 | ≤0.06 | ≤0.30 | ≤0.30 | / |
| P235GH | ≤0.16 | ≤0.35 | ≤1.20 | ≤0.025 | ≤0.020 | ≤0.30 | ≤0.06 | ≤0.30 | ≤0.30 | / | |
| P265GH | ≤0.20 | ≤0.40 | ≤1.40 | ≤0.025 | ≤0.020 | ≤0.30 | ≤0.06 | ≤0.30 | ≤0.30 | / | |
| 13CrMo4-5 | 0. 10～0. 17 | ≤0.35 | 0. 40～0. 70 | ≤0.025 | ≤0.020 | 0. 70～1.15 | 0. 40～0. 60 | ≤0.30 | ≤0.30 | / | |
| 10CrMo9-10 | 0. 08～0. 14 | ≤0.50 | 0. 30～0. 70 | ≤0.025 | ≤0.020 | 2. 00～2. 50 | 0. 90～1. 10 | ≤0.30 | ≤0.30 | / | |
Am postála: Jun-07-2022