Yintoni umbhobho wenickel we-625?
I-Inconel® nickel chromium Alloy 625 (UNS N06625 / W.Nr. 2.4856) yenziwe kwi-nickel-chromium-molybdenum alloy kunye nokongezwa kwe-niobium.Amandla aphezulu kunye nokuqina ukusuka kumaqondo obushushu e-cryogenic ukuya kwi-1800°F. Ukuxhathisa okulungileyo kwi-oxidation, amandla akhethekileyo okudinwa, kunye nokuxhathisa okulungileyo kwizinto ezininzi ezidliwayo.
Ingxubevange 625 Nickel Umbhobhoiintlobo:
I-alloy 625 Nickel I-Seamless Pipe yenziwe nge-Nickel Chromium Molybdenum Alloys kunye nokongezwa kwe-Niobium.Amandla aphezulu kunye nokuqina ukusuka kumaqondo obushushu e-cryogenic ukuya kwi-1800 F. Ukuxhathisa okulungileyo kwe-oxidation, amandla akhethekileyo okudinwa, kunye nokuxhathisa okulungileyo kwizinto ezininzi ezidliwayo.
Ingxubevange 625 Nickel Umbhobho Seamless luhlobo ezimbini ERW kunye EFW.Inkqubo yokuvelisa umbhobho odibeneyo yi-Electric Resistance Welding (ERW) eyaziwa ngokuba yi-Contact Welding.Ukuqhutyelwa kwe-Welding ye-Electric Fusion Welding, ebizwa ngokuba yi-Continuous Welding iqala njengentsimbi edibeneyo kunye nobukhulu obufanelekileyo, ububanzi kunye nobunzima benziwe.I-Alloy 625 UNS N06625 ifumaneka kuluhlu olubanzi kunye neepropati.Ngenxa ye-weld seam, uxinzelelo oluphantsi lokusebenza luchazwe ngokuhambelana ne-ASME xa kuthelekiswa nemibhobho engenamthungo.Ngokubanzi umbhobho odityanisiweyo we-Inconel unobume bobukhulu obungqongqo kunemibhobho engenamthungo kwaye ineendleko eziphantsi xa iveliswe ngezixa ezifanayo.I-Inconel Welded Pipe ubukhulu buqala kwi-1/8″ ukuya kwi-48″ intshi kunye nobukhulu bemibhobho ngolu hlobo lulandelayo: Sch 5, Sch 5s, Sch 10, Sch 10s, Sch 20, Sch 30, Sch 40s, Sch 40, Sch 40 , I-Sch 60, i-Sch 80s, i-Sch 100, i-Sch 120, i-Sch XS, i-Sch XXS, i-Sch 160. Umbhobho we-Inconel wenziwa kwaye ugqitywe ngokwemigangatho ye-dimension njenge-ANSI B36.10 kunye ne-ANSI B36.19.
| Iintlobo | Ngaphandle kwedayimitha | Ubunzima bodonga | Ubude |
| NB ubukhulu (kwisitokhwe) | 1/8” ~ 8” | SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 | Ukuya kwi-6 yeemitha |
| i-inconel 625 uMbhobho ongenamthungo (ubukhulu beSiko) | 5.0mm ~ 203.2mm | Ngokwemfuno | Ukuya kwi-6 yeemitha |
| i-inconel 625 Umbhobho odityanisiweyo (kwiSitokhwe + Ubungakanani obuSiko) | 5.0mm ~ 1219.2mm | 1.0 ~ 15.0 mm | Ukuya kwi-6 yeemitha |
Iimpawu zeASTM :
I-ASTM (uMbutho waseMelika woVavanyo kunye neZixhobo) kwiimveliso ezahlukeneyo ezenziwe kwiBanga le-Inconel 625 zezi zilandelayo:
| Umbhobho ongenamthungo | Umbhobho Welded | Umbhobho ongenamthungo | Umbhobho Welded | Icwecwe/ipleyiti | Ibha | Ukuqulunqa | Ukulinganisa | Ucingo |
| B444 | B705 | B444 | B704 | B443 | B446 | - | - | - |
I-Inconel Alloy 625 imibhobho kunye neMibhobho yokuBunjwa kweMichiza
| IBanga | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Ikhoneli 625 | 0.10 ubuninzi | 0.50 ubuninzi | 0.50 ubuninzi | 0.015 ubuninzi | - | 5.0 ubuninzi | 58.0 imiz | 20.0 - 23.0 |
Ingxubevange yeNickel 625 imibhobho kunye neePropati zoomatshini beTubhing
| Isiqalelo | Ukuxinana | Indawo yokunyibilika | Tensile strength | Ukomelela kweSivuno (0.2% i-offset) | Elongation |
| Ikhoneli 625 | 8.4 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 517 | 42.5 % |
Inconel 625 imibhobho & Iityhubhu Equivalent Grades
| UMGANGATHO | UNS | WERKSTOFF NR. | I-JIS | UKUBALULEKILE | BS | IGOST | EN |
| I-Inconel Alloy 625 | N06625 | 2.4856 | NCF 625 | NC22DNB4M | NA 21 | ХН75МБТЮ | I-NiCr22Mo9Nb |
Iingcebiso ze-Inconel ze-625 ze-Welding
i-inconel 625 Umbhobho yi-nickel-chromium alloys esetyenziswa ngeendlela ezahlukeneyo zokuwelda.i-inconel 625 Umbhobho usetyenziswa kakhulu kwiinkqubo apho kufuneka ukunyamezela ubushushu obuphezulu.I-Welding Inconel inokuba okanye inzima ngenxa yokuba i-welds eyenziwayo inomkhuba wokwahlula.Zininzi iialloyi ze-Inconel ezicetywe ngokukodwa ukuba zisetyenziswe kwi-welding njenge-TIG.
Sikwabonelela nge-Inconel 625 Alloy wire, bar, sheet, plate, tube, fittings, flanges, forgings, and welding rod.
Ixesha lokuposa: Oct-09-2021