English

SSAW Karfe bututu

Hoton Bututu Karfe SSAW
  • SSAW Karfe bututu
  • SSAW Karfe bututu
  • SSAW Karfe bututu
  • SSAW Karfe bututu

Takaitaccen Bayani:


  • Keywords (nau'in bututu):SSAW bututu, SSAW Karfe bututu, Karfe Karfe bututu, Welded Karfe bututu
  • Girma:OD: 219.1mm ~ 3500mm;WT: 6mm ~ 25mm (Har zuwa 1''); Tsawon: 6mtr ~ 18mtr, SRL, DRL
  • Standard & Daraja:ASTM A53 Grade A/B/C, AWWA C200
  • Ƙarshe:Ƙarshen Ƙarshen Ƙarshe, Yanke Square, Tare da Haɗin LTC/STC/BTC/VAM
  • Bayarwa:A cikin kwanaki 30 kuma Ya dogara da adadin odar ku
  • Biya:TT, LC, OA, D/P
  • Shiryawa:A cikin Girma, Yana Ƙarshe Mai Kariya ta Fuskokin Biyu, An Nade Kayayyakin Rashin Ruwa
  • amfani:Ana amfani da shi don isar da ruwa mara ƙarfi, kamar ruwa, gas, da mai.
    • Zazzage azaman PDF

    Bayani

    Ƙayyadaddun bayanai

    Daidaitawa

    Zane & Rufi

    Shiryawa & Lodawa

    Bututun SSAW cikakken suna shi ne bututun walda mai kaifi Submerged arc.Ana samar da bututun ne ta hanyar fasahar waldawar baka wacce ake kira SSAW pipe.Gabaɗaya magana, idan aka zo ga ma'auni ɗaya da ƙimar ƙarfe, farashin bututun SSAW ya fi arha ko ƙasa da bututun ERW da bututun LSAW.Ƙarfin ya fi tsayin bututu mai walƙiya madaidaiciya.

    SSAW/SAW BUKUNAN KARFE

    Amfani: Ana amfani da shi don isar da ruwa mara ƙarfi, kamar ruwa, gas, da mai.

    Tsari:

    SAW (SAWL,SAWH): Karkashe Welded

    SSAW: Karkace-karkace-baka Welded

    Matsayin Inganci:

    GB/T3091 Welded karfe bututu don low matsa lamba ruwa bayarwa

    GB/T9711 Masana'antar man fetur da iskar gas-Bututun ƙarfe don bututun mai

    IS: 3589 Bututun ƙarfe na ruwa da najasa

    IS: 1978-1982: Bututun ƙarfe don amfani da su wajen jigilar mai;gas & man fetur kayayyakin

    ASTM A53 Madaidaicin Ƙirar Ƙarfe don Bututu, Karfe, Baƙar fata da Zafi, Mai Rufaffen Zinc, Welded da Mara Sumul.

    DIN 2458 BUBUWAN KARFE WELDED DA TUBE

    TS EN 10217 Bututun ƙarfe mai walda don dalilai na matsa lamba.Yanayin bayarwa na fasaha.Ba-alloy karfe bututu tare da ƙayyadadden yanayin zafin jiki na ɗakin

    API 5L Line Pipe

    SY/T5037 Karkaye submerged baka-welded karfe bututu don bututun domin low matsa lamba filin ruwa sabis

    SY/T 5040 Karkaye nutsewar baka-welded karfe bututu tara

    CJ/T 3022 Karkasa submerged-baka welded karfe bututu don birni zafi wadata

    IS : 1978 Bututun ƙarfe don amfani da su wajen jigilar mai;gas & man fetur kayayyakin

    ASTM A252 WELDED DA BUBUWAN KARFE KENAN

    Matsayin Rufe:

    ANSI/AWWA C104/A21.4 Matsayin Ƙasar Amurka don Rufin Siminti-Tarmi don bututun ƙarfe-ƙarfe da kayan aikin ruwa

    TS EN ISO 21809 Masana'antar mai da iskar gas - Rubutun waje don binne ko bututun da aka nutsar da su da ake amfani da su a cikin tsarin jigilar bututun.

    DIN 30670 Polyethylen rufi na karfe bututu da kayan aiki

    Matsayin Karfe:

    BS: 1387, EN10217: S185, S235, S235JR, S235 G2H, S275, S275JR, S355JRH, S355J2H, St12, St13, St14, St33, St37, St44, ST52

    ASTM A 53: Gr.A, Gr B, Gr C, Gr.D

    API 5L: A, B, X42, X46, X52, X56, X60, X65 X70

    GB/T9711: L175, L210, L245, L290, L320, L360, L290, L320, L360, L390, L415, L450, L485, L555

    GB/T3091, SY/T5037, SY/T 5040,CJ/T 3022:Q195, Q215, Q235, Q275, Q295, Q345, 08F, 08, 08AL, 08F, 10F, SP,8G8G5

    Girma:

    SAW:

    Diamita na waje: 219.1mm - 4064mm (8 ″ - 160 ″)

    Kaurin bango: 3.2mm - 40mm

    Tsawo: 6mtr-18mtr

    Ƙarshe: Ƙarshen murabba'i (yanke kai tsaye, yanke gani, da yanke wuta).ko beveled don walda, beveled,

    Surface: Mai sauƙi mai sauƙi, Hot tsoma galvanized, Electro galvanized, Black, Bare, Varnish shafi/Anti tsatsa mai, Kariya Coatings (Coal Tar Epoxy,? Fusion Bond Epoxy, 3-Layer PE)

    Shiryawa: Filogi na filogi a ƙarshen duka, dauren hexagonal na max.2,000kg mai ratsin karfe da yawa, Tambayoyi guda biyu akan kowane damshi, Nannade cikin takarda mai hana ruwa, hannun rigar PVC, da tsumma mai tsumman karfe da yawa, Filastik.

    Gwaji: Nazari na Abubuwan Kemikal, Abubuwan Injini (Ƙarfin Ƙarfin Ƙarfin Ƙarfin Ƙarfin Ƙarfafawa, Ƙarfafawa)

    ƙarfi, Tsawaitawa), Abubuwan Fasaha (Gwajin ƙwanƙwasa, Gwajin Lanƙwasawa, Gwajin Busa, Gwajin Tasiri), Binciken Girman Girman Waje, Gwajin Hydrostatic, Gwajin X-ray.

    Takaddar Gwajin Mill: EN 10204/3.1B

    Duban ɓangare na uku: SGS, BV, Lloyds da dai sauransu.

  • Na baya:
  • Na gaba:
    • Fita Diamita (mm) Kaurin bango (mm)
    6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
    219.1 ● ● ● ●
    273 ● ● ● ● ●
    323.9 ● ● ● ● ● ● ●
    325 ● ● ● ● ● ● ●
    355.6 ● ● ● ● ● ● ●
    377 ● ● ● ● ● ● ● ●
    406.4 ● ● ● ● ● ● ● ●
    426 ● ● ● ● ● ● ● ●
    457 ● ● ● ● ● ● ● ●
    478 ● ● ● ● ● ● ● ●
    508 ● ● ● ● ● ● ● ● ●
    529 ● ● ● ● ● ● ● ● ●
    630 ● ● ● ● ● ● ● ● ● ●
    711 ● ● ● ● ● ● ● ● ● ● ●
    720 ● ● ● ● ● ● ● ● ● ● ●
    813 ● ● ● ● ● ● ● ● ● ● ● ●
    820 ● ● ● ● ● ● ● ● ● ● ● ●
    920 ● ● ● ● ● ● ● ● ● ● ●
    1020 ● ● ● ● ● ● ● ● ● ● ● ● ●
    1220 ● ● ● ● ● ● ● ● ● ● ● ● ●
    1420 ● ● ● ● ● ● ● ● ● ● ●
    1620 ● ● ● ● ● ● ● ● ● ●
    1820 ● ● ● ● ● ● ● ● ●
    2020 ● ● ● ● ● ● ● ● ●
    2220 ● ● ● ● ● ● ● ● ●
    2500 ● ● ● ● ● ● ● ● ● ● ● ● ●
    2540 ● ● ● ● ● ● ● ● ● ● ● ● ●
    3500 ● ● ● ● ● ● ● ● ● ● ● ●

    Binciken Sinadarai da Abubuwan Injini na SSAW Karfe Bututu

    Daidaitawa Daraja Haɗin Sinadari(max)% Kayayyakin Injini(min)
    C Si Mn P S Ƙarfin Tensile (Mpa) Ƙarfin Haɓaka (Mpa)
    API 5CT h40 - - - - 0.030 417 417
    J55 - - - - 0.030 517 517
    K55 - - - - 0.300 655 655
    Saukewa: API5L PSL1 A 0.22 - 0.90 0.030 0.030 335 335
    B 0.26 - 1.20 0.030 0.030 415 415
    X42 0.26 - 1.30 0.030 0.030 415 415
    X46 0.26 - 1.40 0.030 0.030 435 435
    X52 0.26 - 1.40 0.030 0.030 460 460
    X56 0.26 - 1.40 0.030 0.030 490 490
    X60 0.26 - 1.40 0.030 0.030 520 520
    X65 0.26 - 1.45 0.030 0.030 535 535
    X70 0.26 - 1.65 0.030 0.030 570 570
    API 5L PSL2 B 0.22 0.45 1.20 0.025 0.015 415 415
    X42 0.22 0.45 1.30 0.025 0.015 415 415
    X46 0.22 0.45 1.40 0.025 0.015 435 435
    X52 0.22 0.45 1.40 0.025 0.015 460 460
    X56 0.22 0.45 1.40 0.025 0.015 490 490
    X60 0.12 0.45 1.60 0.025 0.015 520 520
    X65 0.12 0.45 1.60 0.025 0.015 535 535
    X70 0.12 0.45 1.70 0.025 0.015 570 570
    X80 0.12 0.45 1.85 0.025 0.015 625 625
    ASTM A53 A 0.25 0.10 0.95 0.050 0.045 330 330
    B 0.30 0.10 1.20 0.050 0.045 415 415
    ASTM A252 1 - - - 0.050 - 345 345
    2 - - - 0.050 - 414 414
    3 - - - 0.050 - 455 455
    Saukewa: EN10217-1 Saukewa: P195TR1 0.13 0.35 0.70 0.025 0.020 320 320
    Saukewa: P195TR2 0.13 0.35 0.70 0.025 0.020 320 320
    Saukewa: P235TR1 0.16 0.35 1.20 0.025 0.020 360 360
    Saukewa: P235TR2 0.16 0.35 1.20 0.025 0.020 360 360
    Saukewa: P265TR1 0.20 0.40 1.40 0.025 0.020 410 410
    Saukewa: P265TR2 0.20 0.40 1.40 0.025 0.020 410 410
    Saukewa: EN10217-2 P195 GH 0.13 0.35 0.70 0.025 0.020 320 320
    P235 GH 0.16 0.35 1.20 0.025 0.020 360 360
    Saukewa: P265GH 0.20 0.40 1.40 0.025 0.020 410 410
    Saukewa: EN10217-5 P235 GH 0.16 0.35 1.20 0.025 0.020 360 360
    Saukewa: P265GH 0.20 0.40 1.40 0.025 0.020 410 410
    Saukewa: EN10219-1 Saukewa: S235JRH 0.17 - 1.40 0.040 0.040 360 360
    S275 JOH 0.20 - 1.50 0.035 0.035 410 410
    Saukewa: S275J2H 0.20 - 1.50 0.030 0.030 410 410
    S355 JOH 0.22 0.55 1.60 0.035 0.035 470 470
    Saukewa: S355J2H 0.22 0.55 1.60 0.030 0.030 470 470
    Saukewa: S355K2H 0.22 0.55 1.60 0.030 0.030 470 470

     

    Machine na masana'anta ssaw karfe bututu

    Edge planing inji, gefen milling inji, bututu sabon inji, butt waldi inji, tsunkule na'ura, na'ura mai aiki da karfin ruwa gwajin inji.

     

    Daidaito da Matsayi

    Rarrabawa Daidaitawa Babban Kayayyakin
    Bututun Karfe don Sabis na Ruwa GB/T 14291 Bututu mai walda don sashin ruwa na ma'adanan
    GB/T 3091 Bututu mai walda don sabis ɗin ruwa mara ƙarfi
    Farashin SY/T5037 Ƙwaƙwalwar ƙayataccen bututun ƙarfe mai walda don bututun bututun don sabis ɗin ruwa mara ƙarfi
    ASTM A53 Baƙar fata da zafi-hipped galvanized welded da sumul karfe bututu
    TS EN 10217-2 Bututun ƙarfe na walda don dalilai na matsin lamba - yanayin fasaha na isarwa - Sashe na 2: Welded Electric wanda ba alloy da gami da bututun ƙarfe na ƙarfe tare da ƙayyadaddun kaddarorin zafin jiki
    Saukewa: EN10217-5 Bututun ƙarfe masu walda don dalilai na matsin lamba - yanayin fasaha na isar da kaya - Sashe na 5: nutsar da baka mai welded mara ƙarfi da bututun ƙarfe na ƙarfe tare da ƙayyadaddun kaddarorin zafin jiki
    Bututun Karfe don Tsarin Talakawa GB/T 13793 Longitudinally lantarki juriya welded karfe bututu
    SY/T 5040 Spirally submerged baka welded karfe bututu tara
    ASTM A252 Tulin bututun ƙarfe maras sumul
    Saukewa: EN10219-1 Sanyi da aka kafa welded sassan sassa na ƙwanƙwasa mara ƙarfi da ƙarancin ƙarfe - Sashe na 1: Yanayin isar da fasaha
    Saukewa: EN10219-2 Sanyi da aka kafa welded sassan sassa na ƙwanƙwasa mara ƙarfi da ƙarancin ƙarfe - Sashe na 2: jurewa dimmsions da kaddarorin sashe
    Bututun Layi GB/T 9711.1 Karfe bututu don bututun sufuri tsarin na man fetur da kuma iskar gas masana'antu (Class A karfe bututu)
    GB/T 9711.2 Karfe bututu don bututun sufuri tsarin na man fetur da kuma iskar gas masana'antu (Class B karfe bututu)
    API 5L PSL1/2 Bututun layi
    Casing API 5CT Bututun ƙarfe don amfani da su azaman casing ko tubing don rijiyoyin masana'antar man fetur da iskar gas

    Ƙarshe: Ƙarshen murabba'i (yanke kai tsaye, yanke gani, da yanke wuta).ko beveled don walda, beveled,

    Surface: Mai sauƙi mai sauƙi, Hot tsoma galvanized, Electro galvanized, Black, Bare, Varnish shafi/Anti tsatsa mai, Kariya Coatings (Coal Tar Epoxy, Fusion Bond Epoxy, 3-Layer PE)

    Bare, Mai Sauƙi mai Sauƙi, Baƙin Zana, Rufin Ƙarfafawa (FBE/2PE/3PE)

    Kunshin bututun Karfe na SSAW

    Dangane da ka'idoji da buƙatun abokin ciniki.Ana ba da kulawa sosai don guje wa duk wani lahani da zai iya haifarwa yayin ajiya ko sufuri.Bugu da kari, ana yi wa takalmi bayyanannun alama a waje na fakitin don sauƙin gano ID ɗin samfur da ingantaccen bayani.

    Don saduwa da dukkan buƙatun kasuwancin abokan cinikinmu, Muna ba da sabis ɗinsa azaman “Kantin Tsaya Daya” don ayyukan kasuwanci waɗanda suka haɗa da Saye, Ƙirƙirar Ƙira, Marufi/Lakabi, da Bayarwa.

    Filastik matosai a ƙarshen duka biyu, dauren hexagonal na max.2,000kg mai ratsin karfe da yawa, Tambayoyi guda biyu akan kowane damshi, Nannade cikin takarda mai hana ruwa, hannun rigar PVC, da tsumma mai tsumman karfe da yawa, Filastik.