Galvanize tiyo san pwoblèm
Pwosesis galvanize cho plonje
Enspeksyon materyèl (tiyo asye) --- Pann --- De-gresaj --- Rense --- marinated --- Lave --- Plonje Fluxing --- Siye lè cho --- Anndan ak deyò cho-tranpe galvanize souflèt
--- Refwadisman --- Pasivasyon ak Rising --- Dechaje --- Enspeksyon ak Taye --- Idantifikasyon Kalite --- Anbalaj ak Depo ak Transpò
| Komodite | Galvanize tiyo san pwoblèm |
| OD | 21.3mm ~ 406.4mm |
| epesè | 0.5mm ~ 20mm |
| longè | 0.3mtr ~ 18mtr |
| materyèl | Q195—Klas B, SS330, SPC, S185Q215—Klas C,CS Tip B, SS330, SPHCQ235---Klas D, SS400, S235JR, S235JO, S235J2Q345---SS500, ST52 |
| Estanda | GB/T13793-1992, GB/T14291-2006, GB/T3091- 1993, GB/T3092-1993, GB3640-88BS1387/1985, ASTM A53/A36, EN39/EN10219,10219,GBT95L, etc. |
| kouch zenk | pre galvanised tiyo asye: 60-150g / m2hot plonje tiyo asye galvanised: 200-400g / m2 |
| aplikasyon | Lajman itilize nan estrikti, accessorize, konstriksyon, transpò likid, pati machin, pati estrès nan pati otomobil tractor ak sou sa. |
| Pake | 1) Gwo OD: an bulk2) Ti OD: chaje pa bann asye 3) Sache plastik 4) Dapre kondisyon kliyan an |
| avantaj | 1. pri rezonab ak ekselan quality2, stock abondan ak livrezon rapid3, ekipman rich ak eksperyans ekspòtasyon, sèvis sensè |
| Eleman Materyèl | Konpozisyon chimik% | Pwopriyete mekanik | ||||||
| C% |
Mn% |
S% |
P% |
Si% | Pwen sede (Mpa) | Fòs rupture (Mpa) | Elongasyon (%) | |
| Q195 | 0.06-0.12 | 0.25-0.50 | <0.050 | <0.045 | <0.30 | > 195 | 315-430 | 32-33 |
| Q215 | 0.09-0.15 | 0.25-0.55 | <0.05 | <0.045 | <0.30 | > 215 | 335-450 | 26-31 |
| Q235 | 0.12-0.20 | 0.30-0.70 | <0.045 | <0.045 | <0.30 | > 235 | 375-500 | 24-26 |
| Q345 | <0.20 | 1.0-1.6 | <0.040 | <0.040 | <0.55 | > 345 | 470-630 | 21-22 |
Degre, marinated, netwaye, galvanize, pasivasyon
