Titanium daidaitattun sassa
Samar da DIN, ANSI / AMSE, ISO, JIS da sauran ka'idoji da ma'auni mai ƙarfi mai ƙarfi na titanium.Yawancin lokaci sun haɗa da kusoshi, sukurori, goro, wanki, zobe mai riƙewa, da sassa daban-daban na musamman.Da fari dai, za mu yi maganin zafi, gwajin abun da ke tattare da sinadaran, gwajin kaddarorin injina na sandunan titanium, faranti na titanium da sauran kayan yau da kullun.Bayan aiwatar da daidaitawa, daidaitawa da gogewa, a yanka a cikin girman da ya dace.Sa'an nan kuma ci gaba zuwa juya, zafi stamping, matsawa dunƙule, zafi magani, polishing, tsaftacewa, dubawa, da kuma jerin hanyoyin, ƙarshe don samar da high quality titanium fasteners.Muna da kayan aikin samarwa na ci gaba wanda ya tabbatar da samfuranmu don cimma mafi kyau a cikin kowane hanyar haɗin samarwa.
Kamfaninmu yana da ƙima mai yawa na titanium fasteners, wanda zai iya gamsar da ƙaramin adadin umarni na duniya da waɗancan abokan ciniki tare da buƙatar isar da gaggawa.A lokaci guda, muna kuma samar da samfurori marasa daidaituwa bisa ga zane da abokan ciniki suka bayar.
Aikace-aikace
Man fetur, karafa, sinadarai, lantarki, magunguna, injiniyan ruwa, sassan mota, sassan babur, sassan kekuna, na'urorin haɗi na jirgin ruwa, kayan tsira na waje, kayan wasanni da sauran fannoni.
Titanium bututu
| Samfura | Titanium da Titanium Alloy Bolt |
| Girman | Diamita: M1.6-M30, Tsawon: 10mm-300mm (0.39″-11.8″) |
| Kayan abu | Gr.1, Gr.2, Gr.5, Gr.7 da dai sauransu |
| Daidaitawa | DIN912, DIN6912, DIN933, DIN931 da dai sauransu |
Titanium hex goro
| Samfura | Titanium da Titanium Alloy nut |
| Girman | M8-M 80 x 6 |
| Kayan abu | Gr1, Gr2, Gr5, Gr7, Ti6Al4V ELI, da dai sauransu |
| Daidaitawa | DIN, ISO, JIS, da dai sauransu. |
Titanium wanki
| Samfura | Titanium da Titanium Alloy Washer |
| Girman | OD: 5mm-200mm (0.20″-7.87″), ID: 1mm-100mm (0.04″-3.94″), Kauri: 0.1mm-30mm (0.004″-1.18″) |
| Kayan abu | Gr.2, Gr.5 da dai sauransu |
| Daidaitawa | DIN125 da dai sauransu |
Titanium dunƙule
| Samfura | Titanium da Titanium alloy dunƙule |
| Girman | M1 zuwa M42, Tsawon: 10mm-300mm (0.39″-11.8″) |
| Kayan abu | Gr1, Gr.2, Gr.5, Gr.7, Gr.12 da dai sauransu |
| Daidaitawa | DIN912, DIN933, DIN84, DIN85, DIN963, DIN7991, DIN6912, DIN931, ISO7380, da dai sauransu. |
Titanium threaded ingarma
| Samfura | Titanium da Titanium Alloy Threaded ingarma |
| Girman | Diamita: M1.6-M30, Tsawon: 10mm-300mm (0.39″-11.8″) |
| Kayan abu | Gr.1, Gr.2, Gr.5, Gr.7, Gr.23 da dai sauransu |
| Daidaitawa | DIN912, DIN933, DIN7991, DIN7984, DIN6921, ISO 7380, JIS, BS da dai sauransu. |
Titanium Hex Bolts Dimensions
| Heavy Hex Bolt Diamita | D | F | C | H | |||||
| Diamita na Jiki | Nisa Tsakanin Filayen | Nisa Tsakanin Kusurwoyi | Tsayi | ||||||
| Max | Na asali | Max | Min | Max | Min | Na asali | Max | Min | |
| 1/2 | 0.515 | 7/8 | 0.875 | 0.850 | 1.010 | 0.969 | 11/32 | 0.364 | 0.302 |
| 5/8 | 0.642 | 1-1/16 | 1.062 | 1.031 | 1.227 | 1.175 | 27/64 | 0.444 | 0.378 |
| 3/4 | 0.768 | 1-1/4 | 1.250 | 1.212 | 1.443 | 1.383 | 1/2 | 0.524 | 0.455 |
| 7/8 | 0.895 | 1-7/16 | 1.438 | 1.394 | 1.660 | 1.589 | 37/64 | 0.604 | 0.531 |
| 1 | 1.022 | 1-5/8 | 1.625 | 1.575 | 1.876 | 1.796 | 43/64 | 0.700 | 0.591 |
| 1-1/8 | 1.149 | 1-13/16 | 1.812 | 1.756 | 2.093 | 2.002 | 3/4 | 0.780 | 0.658 |
| 1-1/4 | 1.277 | 2 | 2.00 | 1.938 | 2.309 | 2.209 | 27/32 | 0.876 | 0.749 |
| 1-3/8 | 1.404 | 2-3/16 | 2.188 | 2.119 | 2.526 | 2.416 | 29/32 | 0.940 | 0.810 |
| 1-1/2 | 1.531 | 2-3/8 | 2.375 | 2.300 | 2.742 | 2.622 | 1 | 1.036 | 0.902 |
| 1-3/4 | 1.785 | 2-3/4 | 2.750 | 2.662 | 3.175 | 3.035 | 1-5/32 | 1.196 | 1.054 |
| 2 | 2.039 | 3-1/8 | 3.125 | 3.025 | 3.608 | 3.449 | 1-11/32 | 1.388 | 1.175 |
| 2-1/4 | 2.305 | 3-1/2 | 3.500 | 3.388 | 4.041 | 3.862 | 1-1/2 | 1.548 | 1.327 |
| 2-1/2 | 2.559 | 3-7/8 | 3.875 | 3.750 | 4.474 | 4.275 | 1-21/32 | 1.708 | 1.479 |
Girman Kwayoyin Hex
| ISO Titanium Hex Nut NB | Ketare Kusurwoyi | MAX Kauri | MIN Kauri | MAX Ko'ina Flats | MIN Tsallake Flat |
| M 8 | 14.38 | 6.8 | 6.44 | 13 | 12.73 |
| M 10 | 17.77 | 8.4 | 8.04 | 16 | 15.73 |
| M 12 | 20.03 | 10.8 | 10.37 | 18 | 17.73 |
| M 14 | 23.35 | 12.8 | 12.1 | 21 | 20.67 |
| M 16 | 26.75 | 14.8 | 14.1 | 24 | 23.67 |
| M 18 | 29.56 | 15.8 | 15.1 | 27 | 26.16 |
| M 20 | 32.95 | 18 | 16.9 | 30 | 29.16 |
| M 22 | 37.29 | 19.4 | 18.1 | 34 | 33 |
| M 24 | 39.55 | 21.5 | 20.2 | 36 | 35 |
| M 27 | 45.2 | 23.8 | 22.5 | 41 | 40 |
| M 30 | 50.85 | 26.6 | 24.3 | 46 | 45 |
| M 33 | 55.37 | 28.7 | 27.4 | 50 | 49 |
| M 36 | 60.79 | 31 | 29.4 | 55 | 53.8 |
| M 39 | 66.44 | 33.4 | 31.8 | 60 | 58.8 |
| M 42 | 71.3 | 34 | 32.4 | 65 | 63.1 |
| M 45 | 76.95 | 36 | 34.4 | 70 | 68.1 |
| M 48 | 82.6 | 38 | 39.4 | 75 | 73.1 |
| M 52 | 88.25 | 42 | 40.4 | 80 | 78.1 |
| M 56 | 93.56 | 45 | 43.4 | 85 | 82.8 |
| M 60 | 99.21 | 48 | 46.4 | 90 | 87.8 |
| M 64 | 104.86 | 51 | 49.1 | 95 | 92.8 |
| M 68 | 110.51 | 54 | 52.1 | 100 | 97.8 |
| m 72x6 | 116.16 | 58 | 56.1 | 105 | 102.8 |
| M 76x6 | 121.81 | 61 | 59.1 | 110 | 107.8 |
| ku 80x6 | 127.46 | 64 | 62.1 | 115 | 112.8 |
Titanium Flat Washer Dimensions
| Ti Alloy Bolt Size | USS | SAE | ||||
| OD (in.) | ID (in.) | Kauri | OD (in.) | ID (in.) | Kauri | |
| 1/8 (#6) | - | - | - | 0.375 | 0.156 | .036/065 |
| 5/32 (#8) | - | - | - | 0.438 | 0.188 | .036/065 |
| 3/16 (#10) | 0.560 | 0.250 | .036/065 | 0.500 | 0.220 | .036/065 |
| 7/32 (#12) | - | - | - | 0.562 | 0.250 | .051/080 |
| 1/4 (#14) | 0.734 | 0.312 | .051/080 | 0.625 | 0.281 | .051/080 |
| 5/16 | 0.875 | 0.375 | .064/.104 | 0.688 | 0.344 | .051/080 |
| 3/8 | 1.000 | 0.438 | .064/.104 | 0.812 | 0.406 | .051/080 |
| 7/16 | 1.250 | 0.500 | .064/.104 | 0.922 | 0.469 | .051/080 |
| 1/2 | 1.375 | 0.562 | .086/132 | 1.062 | 0.531 | .074/.121 |
| 9/16 | 1.469 | 0.625 | .086/132 | 1.156 | 0.594 | .074/.121 |
| 5/8 | 1.750 | 0.688 | .108/.160 | 1.312 | 0.656 | .074/.121 |
| 3/4 | 2.000 | 0.812 | .122/.177 | 1.469 | 0.812 | .108/.160 |
| 7/8 | 2.250 | 0.938 | .136/.192 | 1.750 | 0.938 | .108/.160 |
| 1 | 2.500 | 1.062 | .136/.192 | 2.000 | 1.062 | .108/.160 |
| 1 1/8 | 2.750 | 1.250 | .136/.192 | 2.250 | 1.250 | .108/.160 |
| 1 1/4 | 3.000 | 1.375 | .136/.192 | 2.500 | 1.375 | .136/.192 |
| 1 3/8 | 3.250 | 1.500 | .153/.213 | 2.750 | 1.500 | .136/.213 |
| 1 1/2 | 3.500 | 1.625 | .153/.213 | 3.000 | 1.625 | .153/.213 |
| 1 5/8 | 3.750 | 1.750 | .153/.213 | - | - | - |
| 1 3/4 | 4.000 | 1.875 | .153/.213 | - | - | - |
| 1 7/8 | 4.250 | 2.000 | .153/.213 | - | - | - |
| 2 | 4.500 | 2.125 | .153/.213 | - | - | - |
| 2 1/4 | 4.750 | 2.375 | .193/.248 | - | - | - |
| 2 1/2 | 5.000 | 2.625 | .210/.280 | - | - | - |
| 2 3/4 | 5.250 | 2.875 | .228/.310 | - | - | - |
| 3 | 5.500 | 3.125 | .249/.327 | - | - | - |
Socket Head Cap Screw Dimensions
| Ti Alloy Screw Nom.Girman Zaren Pitch | Jiki | Shugaban | Shugaban | Chamfer | Hexagon | Spline | Maɓalli | Sauyi | |||
| Max | Min | Max | Min | Max | Min | Max | Nom. | Nom. | Min | Max | |
| M1.6 × 0.35 | 1.60 | 1.46 | 3.00 | 2.87 | 1.60 | 1.52 | 0.16 | 1.5 | 1.829 | 0.80 | 2.0 |
| M2 × 0.4 | 2.00 | 1.86 | 3.80 | 3.65 | 2.00 | 1.91 | 0.20 | 1.5 | 1.829 | 1.00 | 2.6 |
| M2.5 × 0.45 | 2.50 | 2.36 | 4.50 | 4.33 | 2.50 | 2.40 | 0.25 | 2.0 | 2.438 | 1.25 | 3.1 |
| M3 × 0.5 | 3.00 | 2.86 | 5.50 | 5.32 | 3.00 | 2.89 | 0.30 | 2.5 | 2.819 | 1.50 | 3.6 |
| M4 × 0.7 | 4.00 | 3.82 | 7.00 | 6.80 | 4.00 | 3.88 | 0.40 | 3.0 | 3.378 | 2.00 | 4.7 |
| M5 × 0.8 | 5.00 | 4.82 | 8.50 | 8.27 | 5.00 | 4.86 | 0.50 | 4.0 | 4.648 | 2.50 | 5.7 |
| M6 × 1 | 6.00 | 5.82 | 10.00 | 9.74 | 6.00 | 5.85 | 0.60 | 5.0 | 5.486 | 3.00 | 6.8 |
| M8 × 1.25 | 8.00 | 7.78 | 13.00 | 12.70 | 8.00 | 7.83 | 0.80 | 6.0 | 7.391 | 4.00 | 9.2 |
| M10 × 1.5 | 10.00 | 9.78 | 16.00 | 15.67 | 10.00 | 9.81 | 1.00 | 8.0 | … | 5.00 | 11.2 |
| M12 × 1.75 | 12.00 | 11.73 | 18.00 | 17.63 | 12.00 | 11.79 | 1.20 | 10.0 | … | 6.00 | 14.2 |
| M14 × 2b | 14.00 | 13.73 | 21.00 | 20.60 | 14.00 | 13.77 | 1.40 | 12.0 | … | 7.00 | 16.2 |
| M16 × 2 | 16.00 | 15.73 | 24.00 | 23.58 | 16.00 | 15.76 | 1.60 | 14.0 | … | 8.00 | 18.2 |
| M20 × 2.5 | 20.00 | 19.67 | 30.00 | 29.53 | 20.00 | 19.73 | 2.00 | 17.0 | … | 10.00 | 22.4 |
| M24 × 3 | 24.00 | 23.67 | 36.00 | 35.48 | 24.00 | 23.70 | 2.40 | 19.0 | … | 12.00 | 26.4 |
| M30 × 3.5 | 30.00 | 29.67 | 45.00 | 44.42 | 30.00 | 29.67 | 3.00 | 22.0 | … | 15.00 | 33.4 |
| M36 × 4 | 36.00 | 35.61 | 54.00 | 53.37 | 36.00 | 35.64 | 3.60 | 27.0 | … | 18.00 | 39.4 |
| M42 × 4.5 | 42.00 | 41.61 | 63.00 | 62.31 | 42.00 | 41.61 | 4.20 | 32.0 | … | 21.00 | 45.6 |
| M48 × 5 | 48.00 | 47.61 | 72.00 | 71.27 | 48.00 | 47.58 | 4.80 | 36.0 | … | 24.00 | |
Titanium threaded ingarma
| ANSI / ASMEB 18.31.2 Sanduna Zare-Unit: inch | ||||
| d | rawa | |||
| UNC | UNF | 8UN | ||
| 1/4 | 0.25 | 20 | 28 | / |
| 5/16 | 0.3125 | 18 | 24 | / |
| 3/8 | 0.375 | 18 | 24 | / |
| 7/16 | 0.4375 | 14 | 20 | / |
| 1/2 | 0.5 | 13 | 20 | / |
| 9/16 | 0.5625 | 12 | 18 | / |
| 5/8 | 0.625 | 11 | 18 | / |
| 3/4 | 0.75 | 10 | 16 | / |
| 7/8 | 0.875 | 9 | 14 | / |
| 1 | 1 | 8 | 12 | 8 |
| 1-1/8 | 1.125 | 7 | 12 | 8 |
| 1-1/4 | 1.25 | 7 | 12 | 8 |
| 1-3/8 | 1.375 | 6 | 12 | 8 |
| Naúrar: inch | ||||
| d | rawa | |||
| UNC | UNF | 8UN | ||
| 1-1/2 | 1.5 | 6 | 12 | 8 |
| 1-5/8 | 1.625 | / | / | 8 |
| 1-3/7 | 1.75 | 5 | / | 8 |
| 1-7/8 | 1.875 | / | / | 8 |
| 2 | 2 | 4-1/2 | / | 8 |
| 2-1/4 | 2.25 | 4-1/2 | / | 8 |
| 2-1/2 | 2.5 | 4 | / | 8 |
| 2-3/4 | 2.75 | 4 | / | 8 |
| 3 | 3 | 4 | / | 8 |
| 3-1/4 | 3.25 | 4 | / | 8 |
| 3-1/2 | 3.5 | 4 | / | 8 |
| 3-3/4 | 3.75 | 4 | / | 8 |
| 4 | 4 | 4 | / | 8 |
| L | 1/2＜L≤2-1/2 | 2-1/2＜L≤4 | 4L≤8 | 8 l≤16 | 16 l |
| Haƙuri tsayin ingarma | ± 0.04 | ± 0.08 | ± 0.10 | ± 0.12 | ± 0.18 |
| Daidaitawa | Bayani | Daidaitawa | Bayani |
| DIN 84 | Slotted cuku kai sukurori | DIN 439 | Jam goro |
| DIN 125 | Lebur washers | DIN 963 | Ramin ƙwanƙwasa lebur ɗin kai |
| DIN 127 | Makullin bazara | DIN 965 | Phillips flat head machine sukurori |
| DIN 912 | Hex socket head hula sukurori | DIN 985 | Kulle goro (tare da abin da ba ƙarfe ba) |
| DIN913/DIN 914/DIN915/DIN916 | Saita sukurori | DIN 1665/DIN 6921 | Hex bolts tare da flange |
| DIN 931 | Hex head hula sukurori (zare sashi) | DIN 6912/DIN 7984 | Hexagon soket bakin ciki hular hula |
| DIN 933 | Hex head hula sukurori (cikakken zaren) | Farashin 7991 | Flat head countersunk socket hula screws |
| DIN 934 | Hex kwayoyi | Farashin 9021 | Lebur mai wanki |
Material Kwatankwacin Maki Don Maƙallan Titanium
| STANDARD | Ayyukan Aiki NR. | UNS |
| Babban darajar Titanium 2 | 3.7035 | R50400 |
| Babban darajar 5 | 3.7165 | R56400 |
Halayen Injiniyan Fasteners Titanium
| Daraja | Ƙarfin Jiki (minti) | Ƙarfin Haɓaka Kashi 0.2%. | Tsawaitawa cikin inch 2 ko 50mm% (min) | ||
| KSI | MPa | KSI | MPa | ||
| Gr.1 | 35 | 240 | 20 - 45 | 138-310 | 24 |
| Gr.2 | 50 | 345 | 40-65 | 275-450 | 20 |
| Gr.3 | 65 | 450 | 55-80 | 380-550 | 18 |
| Gr.4 | 80 | 550 | ≥70 | ≥483 | 15 |
| Gr.5 | 138 | 950 | ≥128 | ≥880 | 14 |
| Gr.7 | 50 | 345 | ≥40 | ≥275 | 24 |
| Gr.9 | 125 | 860 | ≥ 105 | ≥725 | 10 |
| Gr.12 | 70 | 483 | ≥50 | ≥345 | 18 |
| Gr.23 | 125 | 860 | ≥115 | ≥790 | 15 |
| Abun ciki | Yawan yawa | Matsayin narkewa | Ƙarfin Ƙarfin Ƙarfi | Ƙarfin Haɓaka (0.2% Kashe) | Tsawaitawa |
| Titanium Gr.2 | 4.5 g/cm 3 | 1665°C (3030°F) | Psi – 49900, MPa – 344 | Psi – 39900, MPa – 275 | 20% |
| Titanium Gr.5 | 4.43 g/cm 3 | 1632 °C (2970 °F) | Psi – 138000, MPa – 950 | Psi – 128000, MPa – 880 | 14% |
Haɗin Kayan Kemikal Na Masu Haɗa Titanium
| Daraja | Fe% | C% | N% | H% | O% | Al% | V% | Mo% | Ni% | Pd% | Ti |
| Gr1 | 0.2 | 0.08 | 0.03 | 0.015 | 0.18 | - | - | - | - | - | BAL. |
| Gr2 | 0.3 | 0.08 | 0.03 | 0.015 | 0.25 | - | - | - | - | - | BAL. |
| Gr3 | 0.3 | 0.08 | 0.05 | 0.015 | 0.35 | - | - | - | - | - | BAL. |
| Gr4 | 0.3 | 0.08 | 0.05 | 0.015 | 0.40 | - | - | - | - | - | BAL |
| Gr5 | 0.25 | 0.08 | 0.03 | 0.015 | 0.02 | 5.5 - 6.75 | 3.5 - 4.5 | - | - | - | BAL |
| Gr7 | 0.3 | 0.08 | 0.03 | 0.015 | 0.25 | - | - | - | - | 0.12 - 0.25 | BAL. |
| Gr9 | 0.25 | 0.08 | 0.03 | 0.015 | 0.15 | 2.5 - 3.3 | 2.0 - 3.0 | - | - | - | BAL. |
| Gr12 | 0.3 | 0.08 | 0.03 | 0.015 | 0.25 | - | - | 0.2 - 0.4 | 0.6 - 0.9 | - | BAL. |
| Gr23 | 0.3 | 0.08 | 0.03 | 0.015 | 0.13 | 5.5 - 6.75 | - | - | - | - | B |
