Titanium Rod / Bar
Titanium bar are divided into pure titanium bar and titanium alloy bars. For pure titanium bars we mainly provide Gr1, Gr2, Gr4 and other grades; we provide titanium alloy bars of Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 etc.
Titanium bar is one of the most common kinds of titanium products. It is the base material of many titanium products for further processing. The larger diameter titanium bar can be directly produced by forging. We have the free forging equipment which helps to produce the large size titanium bars. In the process of forging, the titanium ingot is deformed uniformly in a short time from inside to outside, improved the titanium mechanical properties. The material quality has been greatly improved compared to the hammer forging; Small diameter titanium bars can be produced after multiple rolling and annealing, and removed titanium oxide layer by mechanical processing in the end.
We provide turning surface and polished surface of titanium bar. At the same time, we have plenty of titanium bars inventory in different sizes, for those customers with urgent demands on the time of delivery and the customers with a small amount needed.
Titanium Bar Applications
Titanium bar can be used in aircraft engines, parts, chemical equipment parts (reactors, pipes, heat exchangers, and valves.), ship hulls, bridges, medical implants, artificial bones, and sporting products, and consumer goods. Titanium bar is also used as titanium fasteners, such as titanium bolts nuts.
We produce titanium bar according to customers’ drawings. Special requirements will be agreed on by the titanium suppliers and titanium buyers of negotiation. Our bars for medical applications have tight tolerances and consistency in chemical composition, reducing machine set-up time, and increasing cutting speeds. The excellent surface finish of our medical bars saves polishing time and contributes to a better end-product.
Chemical Requirements (Nominal %)
钛棒 Titanium Rod / Bar |
|||
牌号 Grade |
供应状态Supply Status | 直径 Diameter |
长度 Length |
Gr1,Gr2,Gr3,Gr4Gr5(Ti-6Al-4V),Gr7(Ti-0.2Pd),Gr9(Ti-3Al-2.5V) Gr11(Ti-0.2Pd ELI) Gr12(Ti-0.3Mo-0.8Ni)Gr23(Ti-6Al-4V ELI) |
热加工态(R) |
4~300mm |
6000mm |
冷加工态(Y) |
6000mm |
||
退火状态(M) |
6000mm |
||
ASTM B348, ASME SB348, ASTM B381, AMS4928,ASTM F67, ASTM F136.etc.
The specification can according to clients’ requirements. |
polishing time and contributes to a better end-product.
Chemical Requirements (Nominal %)
Grade |
Status |
Diameter(mm) |
Length(mm) |
Gr1,Gr2,Gr4,Gr5,Gr7,Gr9,Gr11,Gr12,Gr16,Gr23 |
Hot rolled (R) |
6~115 |
10~6000 |
Cold rolled (Y) |
|||
Annealed (M) |
TITANIUM ROUND BAR (Availability may vary by alloy) |
|||
Diameter (Inches) |
Appx. Weight Per Foot |
Diameter (Inches) |
Appx. Weight Per Foot |
0.1875 |
.05 |
3.25 |
16.22 |
0.25 |
.10 |
3.5 |
18.82 |
0.3125 |
.15 |
3.75 |
21.60 |
0.375 |
.22 |
4.0 |
24.58 |
0.4375 |
.29 |
4.25 |
27.74 |
0.5 |
.38 |
4.5 |
31.10 |
0.5625 |
.48 |
4.75 |
34.01 |
0.625 |
.60 |
5.0 |
37.68 |
0.6875 |
.71 |
5.25 |
41.54 |
0.75 |
.86 |
5.5 |
46.46 |
0.8125 |
.99 |
5.75 |
49.83 |
0.875 |
1.18 |
6.0 |
55.30 |
0.9375 |
1.32 |
6.25 |
58.88 |
1.0 |
1.54 |
6.5 |
64.80 |
1.125 |
1.94 |
7.0 |
75.30 |
1.25 |
2.40 |
7.5 |
86.40 |
1.375 |
2.90 |
8.0 |
98.30 |
1.5 |
3.46 |
8.25 |
104.60 |
1.625 |
3.98 |
8.5 |
111.00 |
1.750 |
4.62 |
9.0 |
124.40 |
1.875 |
5.40 |
9.5 |
138.60 |
2.0 |
6.14 |
10.0 |
153.60 |
2.25 |
7.78 |
11.0 |
185.90 |
2.375 |
8.50 |
12.0 |
212.20 |
2.5 |
9.60 |
13.0 |
259.60 |
2.625 |
10.58 |
14.0 |
301.10 |
2.75 |
11.62 |
15.0 |
351.40 |
3.0 |
13.82 |
16.0 |
385.90 |
CP GRADE 2 SQUARE TITANIUM BAR |
|
Size in Inches |
Weight Per Foot |
1/4 x 1/4 |
.12 |
3/8 x 3/8 |
.28 |
1/2 x 1/2 |
.49 |
3/4 x 3/4 |
1.10 |
1 x 1 |
1.96 |
1-1/2 x 1-1/2 |
4.40 |
2 x 2 |
7.82 |
2-1/2 x 2-1/2 |
12.23 |
UNS No.
UNS No. |
UNS No. |
||||
Gr1 |
UNS R50250 |
CP-Ti |
Gr11 |
UNS R52250 |
Ti-0.15Pd |
Gr2 |
UNS R50400 |
CP-Ti |
Gr12 |
UNS R53400 |
Ti-0.3Mo-0.8Ni |
Gr4 |
UNS R50700 |
CP-Ti |
Gr16 |
UNS R52402 |
Ti-0.05Pd |
Gr7 |
UNS R52400 |
Ti-0.20Pd |
Gr23 |
UNS R56407 |
Ti-6Al-4V ELI |
Gr9 |
UNS R56320 |
Ti-3Al-2.5V |
Chemical composition
Grade |
Chemical composition, weight percent (%) |
||||||||||||
C (≤) |
O (≤) |
N (≤) |
H (≤) |
Fe (≤) |
Al |
V |
Pd |
Ru |
Ni |
Mo |
Other Elements Max. each |
Other Elements Max. total |
|
Gr1 |
0.08 |
0.18 |
0.03 |
0.015 |
0.20 |
— |
— |
— |
— |
— |
— |
0.1 |
0.4 |
Gr2 |
0.08 |
0.25 |
0.03 |
0.015 |
0.30 |
— |
— |
— |
— |
— |
— |
0.1 |
0.4 |
Gr4 |
0.08 |
0.25 |
0.03 |
0.015 |
0.30 |
— |
— |
— |
— |
— |
— |
0.1 |
0.4 |
Gr5 |
0.08 |
0.20 |
0.05 |
0.015 |
0.40 |
5.5~6.75 |
3.5~4.5 |
— |
— |
— |
— |
0.1 |
0.4 |
Gr7 |
0.08 |
0.25 |
0.03 |
0.015 |
0.30 |
— |
— |
0.12~0.25 |
— |
0.12~0.25 |
— |
0.1 |
0.4 |
Gr9 |
0.08 |
0.15 |
0.03 |
0.015 |
0.25 |
2.5~3.5 |
2.0~3.0 |
— |
— |
— |
— |
0.1 |
0.4 |
Gr11 |
0.08 |
0.18 |
0.03 |
0.15 |
0.2 |
— |
— |
0.12~0.25 |
— |
— |
— |
0.1 |
0.4 |
Gr12 |
0.08 |
0.25 |
0.03 |
0.15 |
0.3 |
— |
— |
— |
— |
0.6~0.9 |
0.2~0.4 |
0.1 |
0.4 |
Gr16 |
0.08 |
0.25 |
0.03 |
0.15 |
0.3 |
— |
— |
0.04~0.08 |
— |
— |
— |
0.1 |
0.4 |
Gr23 |
0.08 |
0.13 |
0.03 |
0.125 |
0.25 |
5.5~6.5 |
3.5~4.5 |
— |
— |
— |
— |
0.1 |
0.1 |
Physical properties
Grade |
Physical properties |
|||||
Tensile strength Min |
Yield strength Min (0.2%,offset) |
Elongation in 4D Min (%) |
Reduction of Area Min (%) |
|||
ksi |
MPa |
ksi |
MPa |
|||
Gr1 |
35 |
240 |
20 |
138 |
24 |
30 |
Gr2 |
50 |
345 |
40 |
275 |
20 |
30 |
Gr4 |
80 |
550 |
70 |
483 |
15 |
25 |
Gr5 |
130 |
895 |
120 |
828 |
10 |
25 |
Gr7 |
50 |
345 |
40 |
275 |
20 |
30 |
Gr9 |
90 |
620 |
70 |
483 |
15 |
25 |
Gr11 |
35 |
240 |
20 |
138 |
24 |
30 |
Gr12 |
70 |
483 |
50 |
345 |
18 |
25 |
Gr16 |
50 |
345 |
40 |
275 |
20 |
30 |
Gr23 |
120 |
828 |
110 |
759 |
10 |
15 |
Tolerance (mm)
Diameter |
Size variations |
Out of round, Out of square |
6.0~8.0 |
±0.13 |
0.20 |
8.0~11.0 |
±0.15 |
0.23 |
11.0~16.0 |
±0.18 |
0.25 |
16.0~22.0 |
±0.20 |
0.30 |
22.0~25.0 |
±0.23 |
0.33 |
25.0~28.0 |
±0.25 |
0.38 |
28.0~32.0 |
±0.28 |
0.41 |
32.0~35.0 |
±0.30 |
0.46 |
35.0~38.0 |
±0.36 |
0.53 |
38.0~50.0 |
±0.40 |
0.58 |
50.0~65.0 |
+0.79 |
0.58 |
65.0~90.0 |
+1.19 |
0.89 |
90.0~115.0 |
+1.59 |
1.17 |