Product Category

Projects

Tubing

Keywords: API Tubing, Tubing Pipe, Oil Tubing, Well Tubing, Tubing

Size: OD: 40.26mm ~ 114.3mm； WT: 3.18mm ~ 16mm； LENGTH: R1, R2, R3

Standard & Grade: API 5CT J55/K55/N80/C75/L80/C90/T95/Q125

Ends: Beveled, Square Cut, With NUE/EUE Connection

Packing: Protection Caps in both End, Waterproof Paper Wrapped, Two Tags

Usage: Used for the Transmission of Oil & Gas

Thread: NUE, EUE, STC, LTC, BTC, Premium Connection

Special Service: Sweet Service, Sour Service, Anti-H2S, NACE MR0175/ISO15156

Perhaps you would like to contact us via email. Please click on the link below to send us an emailinfo@hnssd.com

Get A Quote

Leave Your Requirement Information

Product Detail
Specification
Standard
Painting & Coating
Packing & Loading
FAQ

Tubing: Tubing is pipe used for the transportation of crude oil and natural gas from an oil or gas layer to the surface after drilling is complete. It is made to withstand the pressure generated from the extraction process. Tubing is manufactured in the same way as casing, except that an additional process known as "upsetting" is applied to thicken the pipes. Tubing is a relatively small-diameter pipe that is run into a well to serve as a conduit for the passage of oil and gas to the field surface facilities for processing. Tubing must be adequately strong to resist loads and deformations associated with production and workovers. Further, tubing must be sized to support the expected rates of production of oil and gas.

Process: ERW and Seamless

Standard: API 5CT

Certificate: Tubing: LTC, STC, BTC, VAM.Tubing: NUE, EUE.

Out Diameter: Casing: OD 4 1/2"- 20" (114.3mm-508mm)

Tubing: OD 2 3/8" - 4 1/2" (60.3mm-114.30mm)

Wall Thickness: 0. 205"- 0.635"

Length: R1(4.88mtr-7.62mtr), R2(7.62mtr-10.36mtr), R3(10.36mtr or longer)

Steel Grade: H-40, J55, K-55, N-80, C-75, L-80, C-90, T-95, Q-125

Surface: Corrosion proofing water based paint

End: Beveled, Square cut. And pipe protection cap especially for casing and tubing.

Heat treatment: Normalized, Quencher+Temper

Tubing Specifications:

Tubing is specified by grade, outer diameter, weight, and connection. API tubing grades correspond to casing grades with the exception that P grade tubing has a tensile strength of 105,000 psi and is referred to as P105.

Tubing comes with non-upset (NUE) and external upset (EUE) ends. EUE tubing is more common, because of the benefit that cutting threads into the tubing ends does not reduce the body strength.

NB: for ESP applications, if power cable clearance between the tubing and casing becomes an issue, NUE tubing should be considered.

Internal diameter (ID): is a result of the OD and the wall thickness, and it is used to calculate pressure losses and velocities.

The drift diameter: is the diameter of a 42” long mandrel that passes through tubing joint. It is a foremost parameter as it gives the maximum OD of any equipment to run through the tubing string.

Maximum outside diameter: it depends on the nominal diameter and the connection type. It is critical as it determines the strings size that we can run in a given casing.

Nominal size: is the outside diameter of the pipe body. The most used sizes are: 2-⅜”, 2-⅞”, 3-½” and 4-½”.

The tubing joint length: is the length of tubing joint including the coupling and excluding the pin thread. It is classified into two length range: range I: from 20 ft to 24 ft (6.1 to 7.32 m) long, or range II: from 28 ft to 32 ft (8.53 to 9.75 m) long. The length range must be chosen with care. It must be compatible with the hoisting and storage capacity of the mast of the rig used when running in hole the equipment during completion as well as later on during workover operations.

Package: Steel bundle ,Protector on both end .hexagonal bundles of max. 2000kgs with several steel strips , two tags on each bundle , wrapped in waterproof paper , PVC sleeve and sackcloth with several steel strips .

Heat treatment: Normalized , Quencher+Temper

Test: Chemical Component Analysis , Mechanical Properties (Ultimate tensile strenth ,Yield strenth ,Elongation )

Technical Properties ( Flattening test , flaring test , bending test , hardness test , blow test , impact test etc )

Exterior size inspection , Nondestructive test ( Ultrasonic flaw detector , eddy curent flaw detector ) Hydrostatic test .

Mill Test Certificate: EN10204/3.1B and EN10204/3.2 Certificat .

Third Party Inspection: SGS , BV ,LLoyds etc

Lengths:

Oil Tubing	Range 1	Range 2	Range 3
Oil Tubing	6.10~7.32	8.53~9.75	11.58~12.80

Dimension:

Label

D Outside diameter mm

Wall thickness mm

C Type of end-finish

NU T&C

EU T&C

H40

J55

L80

N80 1Q

C90

T95

P110

1.9	2.75	2.9	2.76	48.26	3.68	PNUI	PNUI	PNUI	PNUI	PNUI	PNUI	-
1.9	3.65	3.73	-	48.26	5.08	PU	PU	PU	PU	PU	PU	PU
1.9	4.42	-	-	48.26	6.35	-	-	P	-	P	P	-
2 3/8	4	-	-	60.32	4.24	PU	PN	PN	PN	PN	PN	-
2 3/8	4.6	4.7	-	60.32	4.83	PNU	PNU	PNU	PNU	PNU	PNU	PNU
2 3/8	5.8	5.95	-	60.32	6.45	-	-	PNU	PNU	PNU	PNU	PNU
2 3/8	6.6	-	-	60.32	7.49	-	-	P	-	P	P	-
2 3/8	7.35	7.45	-	60.32	8.53	-	-	PU	-	PU	PU	-
2 7/8	6.4	6.5	-	73.02	5.51	PNU	PNU	PNU	PNU	PNU	PNU	PNU
2 7/8	7.8	7.9	-	73.02	7.01	-	-	PNU	PNU	PNU	PNU	PNU
2 7/8	8.6	8.7	-	73.02	7.82	-	-	PNU	PNU	PNU	PNU	PNU
2 7/8	9.35	9.45	-	73.02	8.64	-	-	PU	-	PU	PU	-
2 7/8	10.5	-	-	73.02	9.96	-	-	P	-	P	P	-
3 1/2	7.7	-	-	88.9	5.49	PN	PN	PN	PN	PN	PN	-
3 1/2	9.2	9.3	-	88.9	6.45	PNU	PNU	PNU	PNU	PNU	PNU	PNU
3 1/2	10.2	-	-	88.9	7.34	PN	PN	PN	PN	PN	PN	-
3 1/2	12.7	12.95	-	88.9	9.52	-	-	PNU	PNU	PNU	PNU	PNU
3 1/2	14.3	-	-	88.9	10.92	-	-	P	-	P	P	-
3 1/2	15.5	-	-	88.9	12.09	-	-	P	-	P	P	-
4	9.5	-	-	101.6	5.74	PN	PN	PN	PN	PN	PN	-
4	10.7	11	-	101.6	6.65	PU	PU	PU	PU	PU	PU	-
4	13.2	-	-	101.6	8.38	-	-	P	-	P	P	-
4	16.1	-	-	101.6	10.54	-	-	P	-	P	P	-
4 1/2	12.6	12.75	-	114.3	6.88	PNU	PNU	PNU	PNU	PNU	PNU	-
4 1/2	15.2	-	-	114.3	8.56	-	-	P	-	P	P	-

Mechanical Properties :

Anti-corrosion Water Based Paint

What is OCTG and what are its main components?

OCTG stands for Oil Country Tubular Goods. It is a family of seamless or welded steel pipes specifically designed for use in oil and gas wells. OCTG is essential for drilling, completing, and producing from a well. The three primary components are:
Casing: The structural "backbone" of the well. It is run into the drilled hole to prevent the wellbore from collapsing and to isolate different underground formations (e.g., freshwater zones from oil/gas zones).
Tubing: The conduit placed inside the casing. It serves as the channel through which oil or gas is brought to the surface during production.
Drill Pipe: The heavy, thick-walled pipe used to transmit drilling fluid to the drill bit and to rotate the bit during the drilling process.

What steel grades do you supply, and what do they mean?

We supply a comprehensive range of API 5CT standard steel grades, each designed for specific well conditions. The grade indicates the minimum yield strength (in ksi) and the material's properties.
Group 1 (Standard Grades):
H40, J55, K55: General-purpose grades for shallow to medium-depth wells with low to moderate pressure. K55 is commonly used for surface casing.
Group 2 (Higher Strength):
N80 (Type 1 & 2): A versatile, high-strength grade suitable for a wide range of applications, including intermediate and production casing.
L80 (Type 1, 9Cr, 13Cr): Designed for sour service environments (containing H₂S). L80-13Cr offers superior corrosion resistance.
Group 3 (High Performance):
C90, T95: Used in high-pressure, high-temperature (HPHT) wells and sour service applications.
P110, Q125: High-strength grades for deep wells and high-pressure environments where maximum burst and collapse resistance are required.

What types of connections (threads) are available?

The connection is a critical component of any OCTG string. We offer both standard API connections and advanced Premium Connections.
API Connections:
Short Round Thread (STC): A simple, cost-effective connection for shallow wells.
Long Round Thread (LTC): Similar to STC but with a longer thread for slightly better performance.
Buttress Thread (BTC): Provides high tensile strength and is suitable for deeper, heavier wells.
Premium Connections (Non-API):
These are engineered for extreme conditions, offering superior gas-tight sealing, high tensile strength, and excellent fatigue resistance. They are essential for HPHT wells, deepwater applications, and complex well geometries. We can supply various premium connection types based on your specific project requirements.

How do you ensure the quality and integrity of the pipes?

We implement a rigorous multi-stage quality control process to ensure every pipe meets the required specifications:
Chemical Composition Analysis: Verifying the steel grade's elemental makeup.
Mechanical Property Testing: Including tensile, yield, hardness, and impact tests.
Hydrostatic Testing: Every pipe is pressure-tested to ensure it can withstand specified internal pressures without leaking.
Non-Destructive Testing (NDT): We utilize advanced NDT methods such as Ultrasonic Testing (UT) and Electromagnetic Testing (ET) to detect any internal or surface imperfections.
Dimensional Inspection: Precise measurement of outside diameter (OD), wall thickness, weight, and length.

What is your typical lead time and packaging for export?

Lead Time: For standard API grades and sizes, our lead time is typically 15-30 days after receiving the deposit and final order confirmation. For specialized grades or premium connections, the timeline may be longer.
Packaging: To ensure safe ocean transport, all OCTG products are securely packed. Threads are protected with steel or plastic protectors, and pipes are bundled with steel straps. We can also apply anti-corrosion oil or varnish and use wooden crates for extra protection as per customer requirements.

Prev : Casing
Next : Drill Pipe
Tags : API 5CT tubing , oil well tubing , OCTG tubing , production tubing , J55 tubing , N80 tubing , L80 tubing , P110 tubing , EUE tubing , NUE tubing , seamless oil tubing , ERW tubing , API tubing supplier , injection tubing , sour service tubing , 13Cr tubing