Dab tsi yogInconel 601?
Inconel 601 yog haum rau siv nyob rau hauv daim ntaub ntawv thov kom siab tshaj kub kub thiab corrosion kuj mus txog 1100oC.Vim muaj cov npib tsib xee, cov hlau alloy yog cov resistant rau oxidation mus txog 2200oF lossis 1250oC.Nws tsim cov txheej txheem oxide zoo heev los tiv thaiv kev sib kis hauv qab lub zog thermal cycling.High metallurgical stability thiab nplua creep rupturing zog.Nws zam kev txhim kho SIGMA thiab haum rau kev siv hauv thermal cycling thiab kev ua haujlwm poob siab.
Super alloy 601 muaj cov khoom zoo txhua yam ntawm qhov kub thiab txias.Lub zog zoo yog ua tiav los ntawm kev daws txias lossis nag lossis daus ntxiv dag zog rau ntawm lub hauv paus ntawm alloy.Lub alloy khaws zoo ductility txawm tias tom qab kev pabcuam ntev.Nws yog yooj yim formable, machinable thiab weldable.
Specifications ntawm Inconel 601
| Hlau | Daim ntawv | Sawb | Yeeb | Qws |
| ASTM B 166 / ASME SB 166, DIN 17752, DIN 17753, DIN 17754, EN10095, ISO 9723, ISO 9724, ISO 9725, AWS A 5.14 ERNiCrFe-11 | ASTM B 168 / ASME SB 168 DIN 17750 EN10095 ISO 6208 | ASTM B 168, ASME SB 168, DIN 17750 EN10095, ISO 6208 | ASTM B 167 / ASME SB 167, ASTM B 751 / ASME SB 751, ASTM B 775 / ASME SB 775 ASTM B 829 / ASME SB 829, DIN 17751, ISO 6207 | ASTM B 166 / ASME SB 166, DIN 17752, DIN 17753, DIN 17754, EN10095 ISO 9723, ISO 9724, ISO 9725 |
Inconel 601 tshuaj muaj pes tsawg leeg
| Kev xav tau tshuaj | |||||||
|
| Ni | Cr | C | Mn | Si | S | Fe |
| Max | 63.0 ua | 25.0 Nws | 0.10 | 1.0 | 1.0 | 0.015 ib | Bal |
| Min | 58.0 ua | 21.0 Nws |
|
|
|
|
|
Mechanical Property
| Mechanical Property Requirements | |||||
|
| Qhov kawg Tensile | Yield Strength (0.2% OS) | Elong.hauv 2 nti., lossis 50mm lossis 4D, min., % | R/A | Hardness |
| Cold Worked/Annealed | |||||
| Min | 80 KSi | 30 KSi | 30 |
|
|
| Max |
|
|
|
|
|
| Min | 550 MPa | 205 MPa |
|
|
|
| Max |
|
|
|
|
|
| Kub Ua Haujlwm / Annealed | |||||
| Min | 80 KSi | 30 KSi | 30 |
|
|
| Max |
|
|
|
|
|
| Min | 550 MPa | 205 MPa |
|
|
|
| Max |
|
|
|
|
|
Physical zog
| Qhov ntom | 8.11 Mg/m3 (0.293 lb/in3) |
| Melting Range | 2480-2571 ° F (1360-1411 ° C) |
| Tshwj xeeb kub | 70°F – 0.107 Btu/lb-°F (21°C – 448 J/kg-°C) |
| Permeability ntawm 200 oersted |
|
| 76 ° F - 1.003 (24 ° C - 1.003) | |
| -109 ° F - 1.004 (-78 ° C - 1.004) | |
| -320 ° F - 1.016 (-196 ° C - 1.016) | |
| Curie Kub | <-320 ° F (<-196 ° C) |
Daim ntawv thov
l Cov ntawv thov kub kub hauv kev lag luam automotive thiab aerospace-turbocharger rotors thiab cov ntsaws ruaj ruaj (kev siv tseem ceeb yog Mazda RX-7 thib peb gen), rotary xyaw (Norton maus taus), Formula 1 thiab NASCAR tso pa tawm;
l Cov ntawv thov kub kub hauv aerospace-gas turbine blades thiab ntim rings, seals thiab combustors, dav hlau cav igniters, combustion-can liners, thiab diffuser assembles;
l Cov khoom siv ua kom sov-pob tawb, tais, thiab fixtures rau annealing, carburizing, carbonitriding, nitriding rau industrial-cua sov daim ntaub ntawv, thiab nyob rau hauv radiant hlab, muffles, retorts, nplaim shields, strand-annealing tubes, woven-xaim conveyor siv, thiab hluav taws xob tiv thaiv cua sov ntsiab nyob rau hauv industrial rauv;
l Tshuaj-ua-insulating cov kaus poom hauv ammonia hloov kho thiab cov khoom siv rau nitric acid ntau lawm;
l Petrochemical ua-catalyst generators thiab cua preheaters;
l Cov ntawv thov kev ua qias tuaj-combustion chambers nyob rau hauv cov khoom khib nyiab incinerators;
l Lub zog-tsim teb-superheater raj txhawb cov kab thaiv kab thaiv thiab cov tshauv tuav
Post lub sij hawm: Oct-14-2021