He ahaInconel 601?
Ua kūpono ʻo Inconel 601 no ka hoʻohana ʻana i nā noi e koi ana i ka wela wela kiʻekiʻe loa a me ke kūpaʻa corrosion a hiki i 1100oC.Ma muli o ka loaʻa ʻana o ka nickel, ua kūpaʻa ka alloy i ka oxidation a hiki i 2200oF a i 1250oC.Hoʻopuka ʻo ia i ka papa oxide hilinaʻi nui e pale aku i ka spalling ma lalo o ka paikikala wela ikaika.ʻO ke kūpaʻa metallurgical kiʻekiʻe a me ka ikaika o ka haki ʻana.Hōʻalo ʻo ia i ka hoʻomohala ʻana o SIGMA a kūpono no ka hoʻohana ʻana i ke kaʻa kaʻa wela a me nā hana haʻalulu.
Loaʻa iā Super alloy 601 nā waiwai mechanical maikaʻi ma nā wela kiʻekiʻe.Loaʻa ka ikaika maikaʻi e ka hoʻonā anu a i ʻole ka hoʻoikaika ʻana i ka ua ma ke kumu o ka alloy.Mālama ka alloy i ka ductility maikaʻi ma hope o ka lawelawe lōʻihi.He maʻalahi hiki ke hana, machinable a weldable.
Nā kikoʻī o Inconel 601
| Uea | Pepa | Kaʻi | Paipu | Rod |
| ASTM B 166/ASME SB 166, DIN 17752, DIN 17753, DIN 17754, EN10095, ISO 9723, ISO 9724, ISO 9725, AWS A 5.14 ERNiCrFe-11 | ASTM B 168/ ASME SB 168 DIN 17750 EN10095, ISO 6208 | ASTM B 168/ ASME SB 168, DIN 17750 EN10095, ISO 6208 | ASTM B 167/ASME SB 167, ASTM B 751/ASME SB 751, ASTM B 775/ASME SB 775ASTM B 829/ASME SB 829, DIN 17751,ISO 6207 | ASTM B 166/ASME SB 166,DIN 17752,DIN 17753,DIN 17754,EN10095ISO 9723,ISO 9724,ISO 9725 |
ʻO Inconel 601 ka haku mele
| Koi Kemika | |||||||
|
| Ni | Cr | C | Mn | Si | S | Fe |
| Max | 63.0 | 25.0 | 0.10 | 1.0 | 1.0 | 0.015 | ʻO Bal |
| Min | 58.0 | 21.0 |
|
|
|
|
|
Waiwai Mechanical
| Nā Koina Waiwai Mechanical | |||||
|
| ʻO ke Kuʻi Loa | Ka ikaika hua (0.2% OS) | Elong.i 2 in., a i ʻole 50mm a i ʻole 4D, min., % | R/A | ʻoʻoleʻa |
| Hana anu/Annealed | |||||
| Min | 80 KSi | 30 KSi | 30 |
|
|
| Max |
|
|
|
|
|
| Min | 550 MPa | 205 MPa |
|
|
|
| Max |
|
|
|
|
|
| Hana Wela/Annealed | |||||
| Min | 80 KSi | 30 KSi | 30 |
|
|
| Max |
|
|
|
|
|
| Min | 550 MPa | 205 MPa |
|
|
|
| Max |
|
|
|
|
|
Pwaiwai kino
| ʻO ka mānoanoa | 8.11 Mg/m3 (0.293 lb/in3) |
| Lahui hehee | 2480-2571°F (1360-1411°C) |
| Wela Kūikawā | 70°F – 0.107 Btu/lb-°F (21°C – 448 J/kg-°C) |
| Permeability ma 200 oersted |
|
| 76°F – 1.003 (24°C – 1.003) | |
| -109°F – 1.004 (-78°C – 1.004) | |
| -320°F – 1.016 (-196°C – 1.016) | |
| Ka Mahana Curie | <-320°F (<-196°C) |
Nā noi
l Nā noi wela kiʻekiʻe i ka ʻoihana kaʻa a me ka aerospace–nā rotors turbocharger a me nā sila (ka hoʻohana kaulana ʻo Mazda RX-7 ke kolu o ka gen), nā ʻenekini rotary (Norton moto), Formula 1 a me nā ʻōnaehana hoʻopau NASCAR;
l Nā noi wela kiʻekiʻe i ka aerospace–nā ʻūhā turbine kinoea a me nā apo i hoʻopaʻa ʻia, nā sila a me nā mea puhi ahi, nā mea hoʻoheheʻe jet engine, nā laina hiki ke puhi ʻia, a me nā hui diffuser;
l Nā lako hana wela–nā hīnaʻi, nā pā, a me nā mea pono no ka annealing, carburizing, carbonitriding, nitriding no nā noi hoʻomehana ʻoihana, a i loko o nā paipu kukui, muffles, retorts, pale ahi, strand-annealing tubes, ulana-wire conveyor kāʻei, a me nā mea hoʻomehana pale uila i ka ʻoihana. nā kapuahi;
l Ka hana kemika–ka hoʻokaʻawale ʻana i nā kini i loko o nā mea hoʻoponopono ammonia a me nā mea hana no ka hana ʻana i ka waikawa nitric;
l Ka hana ʻana i ka petrokimia–nā mea hoʻoheheʻe catalyst a me nā ea preheater;
l Nā noi hoʻomalu kino–nā keʻena hoʻopau i loko o nā insinerators ʻōpala paʻa;
l kahua hana mana–Kākoʻo ʻo superheater tube i nā pale ākea a me ka lawelawe ʻana i ka lehu
Ka manawa hoʻouna: ʻOkakopa-14-2021