Small-diameter Welded Pipe

Date: 2021-03-09

Small-diameter Welded Pipe The small-diameter welded pipe is also called small-diameter welded steel pipe, which is a steel pipe made by welding a steel plate or a strip steel after being crimped. The production process of small diameter welded pipe is simple, the production efficiency is high, there are many varieties and specifications, and the equipment cost is small, but the general strength is lower than that of seamless steel pipe. Since the 1930s, with the rapid development of continuous production of high-quality strip steel and the improvement of welding and inspection technology, the quality of welds has been continuously improved, and the variety and specifications of small-diameter welded pipes have been increasing and replaced in more and more fields seamless steel pipe. Welded steel pipe is divided into straight seam welded pipe and spiral welded pipe according to the form of weld. The blanks used for small-diameter welded pipes are steel plates or strips, which are divided into furnace-welded pipes, electric-welded (resistance-welded) pipes, and automatic arc-welded pipes due to their different welding processes. There are two types of welded pipe: straight seam welded pipe and spiral welded pipe. Because of its end shape, it is divided into round welded pipes and special-shaped (square, flat, etc.) welded pipes. The production process of small-diameter welded pipe is simple, high production efficiency, low cost and rapid development. The strength of spiral welded pipes is generally higher than that of straight seam welded pipes. Welded pipes with larger diameters can be produced from narrower billets. Welded pipes with different diameters can also be produced with billets of the same width. However, compared with the straight seam pipe of the same length, the weld seam length is increased by 30 to 100%, and the production speed is lower. Therefore, the smaller-diameter welded pipes are mostly straight seam welded, and the large-diameter welded pipes are mostly spiral welded. Post time: Mar-09-2021

Prev : What Standards Referred to Carbon Steel Plates
Next : API 5L GR.BASTM A53 GR.B, LSAW Carbon Steel Pipe
Tags : stainless steel pipe , coated steel pipe , tubing pipe

News

Latest news list

How to Reduce Erosion and Wear in Steel Elbows

Steel Elbows redirect flow in industrial piping systems,but this change in direction can make them vulnerable to localized erosion,When fluids carry sand,scale,catalyst particles or other solids,repeated particle impacts may gradually reduce the Steel Elbow wall thickness,Corrosion can accelerate the damage when the fluid is also chemically aggressive,Reducing Steel Elbow erosion starts with identifying the wear mechanism,reviewing operating conditions and tracking wall-thickness changes,The right solution depends on the process,material,fitting geometry and piping design,
How Are Steel Reducers Manufactured and Quality Checked

A steel reducer connects pipes of different diameters while providing a controlled transition in a piping system,Its dimensions,material properties and wall-thickness distribution affect installation,flow conditions and service reliability,For project buyers,understanding steel reducer manufacturing and quality control helps ensure that the supplied fittings match the piping design and applicable specifications,
How to Prevent Leakage at Steel Pipe Fitting Connections

Leakage at steel pipe fitting connections can cause unplanned shutdowns,fluid loss,maintenance costs and safety risks,A steel tee,reducer or elbow may meet its dimensional requirements,yet the connection can still leak because of poor fit-up,joining defects,damaged sealing surfaces or excessive operating loads,Preventing leakage requires attention to the complete piping system,from component selection and installation to inspection and operation,The correct approach depends on whether the connection is welded,flanged or threaded,
How Are Steel Tees Manufactured and Inspected

Steel tees are butt-welding pipe fittings used to connect branch lines to a main pipeline,They are commonly specified in oil and gas,petrochemical,power generation and other industrial piping systems,Their suitability depends on more than nominal size: material grade,branch geometry,wall thickness,manufacturing quality and inspection requirements must all match the project specification,For engineers and purchasing teams,understanding how steel tees are manufactured and inspected helps identify the information that should be confirmed before an order is placed,
How to Store and Handle Oil Casing Before Installation

Oil casing needs proper protection from delivery through installation,Poor lifting practices,damaged thread protectors,unsuitable storage conditions or lost product identification can create problems before casing reaches the well,For drilling contractors,site managers and procurement teams,careful receiving,storage and handling help preserve product condition and prevent avoidable delays,