A333-6 low temperature steel pipe welding

A333-6 low temperature steel pipe welding A333-6 steel pipe is a low-temperature steel. The minimum temperature of 70 ° C. Usually normalized or normalized and tempered state supplier. A333-6 steel carbon content is lower, so hardened the tendency and cold cracking tendency are relatively small. Material toughness and ductility is better, generally difficult to produce hardening and cracks, good weldability, optional W707Ni electrode with El the imports of wire TGS 1N, using argon ITU welding. To ensure good toughness of welded joints. Preheat When the ambient temperature is below 5 ° C required weldment preheating. Preheat temperature of 100-150 oC: Preheat the scope of welds on each side of 100 mm; heating oxyacetylene flame (neutral flame) temperature measuring pen measuring the temperature at 50 ~ 100 mm from the center of the weld. The measurement points uniformly distributed, in order to better control the temperature. A333-6 Chemical composition A333-6 Mechanical property Post time: Nov-25-2019 C Mn Si S P ≤0.120 0.290-1.060 ≥0.100 ≤0.058 ≤0.048 tensile strength(Mpa) yield strength(Mpa) elongation(%) 414 241 ≥16.5