Industrial large-diameter plastic-coated spiral steel pipe production process details

Date: 2024-04-07

Industrial large-diameter plastic-coated spiral steel pipe production process details Large-diameter plastic-coated spiral steel pipe is a steel pipe with a polymer coating sprayed on the surface of the steel pipe. It has the characteristics of anti-corrosion, wear resistance, acid and alkali resistance, and anti-aging. Its production process generally includes the following steps: Steel pipe surface treatment: First, the surface of the steel pipe needs to be sandblasted, shot blasted, etc. to remove surface oxide scale, oil stains, rust, and other impurities to prepare for the next step of coating construction. Primer spraying: Spray primer on the surface of the steel pipe, generally using epoxy primer or polyurethane primer. The function of the primer is to protect the surface of steel pipes and improve coating adhesion. Powder coating spraying: Add the powder coating to the spray gun, and spray the coating on the surface of the steel pipe through processes such as electrostatic adsorption, drying, and solidification. There are many types of powder coatings, such as epoxy, polyester, polyurethane, baking paint, etc. You can choose the appropriate coating according to different requirements. Curing and baking: Put the coated steel pipe into the baking room for curing and baking, so that the coating is solidified and tightly combined with the surface of the steel pipe. Cooling quality inspection: After baking is completed, the steel pipe is cooled and quality inspected. Quality inspection includes coating appearance inspection, thickness measurement, adhesion test, etc. to ensure that the product meets relevant standards and requirements. The above is the general production process flow of large-diameter plastic-coated spiral steel pipe. Different manufacturers may make certain improvements and innovations based on their circumstances and technical levels, but the basic production steps are roughly the same. Post time: Apr-07-2024

Prev : What are the precautions for industrial welded steel pipes
Next : What are the cutting methods for industrial steel plates
Tags : api casing and tubing , ERW steel pipe supplier , spiral submerged arc pipe

News

Latest news list

How to Reduce Erosion and Wear in Steel Elbows

Steel Elbows redirect flow in industrial piping systems,but this change in direction can make them vulnerable to localized erosion,When fluids carry sand,scale,catalyst particles or other solids,repeated particle impacts may gradually reduce the Steel Elbow wall thickness,Corrosion can accelerate the damage when the fluid is also chemically aggressive,Reducing Steel Elbow erosion starts with identifying the wear mechanism,reviewing operating conditions and tracking wall-thickness changes,The right solution depends on the process,material,fitting geometry and piping design,
How Are Steel Reducers Manufactured and Quality Checked

A steel reducer connects pipes of different diameters while providing a controlled transition in a piping system,Its dimensions,material properties and wall-thickness distribution affect installation,flow conditions and service reliability,For project buyers,understanding steel reducer manufacturing and quality control helps ensure that the supplied fittings match the piping design and applicable specifications,
How to Prevent Leakage at Steel Pipe Fitting Connections

Leakage at steel pipe fitting connections can cause unplanned shutdowns,fluid loss,maintenance costs and safety risks,A steel tee,reducer or elbow may meet its dimensional requirements,yet the connection can still leak because of poor fit-up,joining defects,damaged sealing surfaces or excessive operating loads,Preventing leakage requires attention to the complete piping system,from component selection and installation to inspection and operation,The correct approach depends on whether the connection is welded,flanged or threaded,
How Are Steel Tees Manufactured and Inspected

Steel tees are butt-welding pipe fittings used to connect branch lines to a main pipeline,They are commonly specified in oil and gas,petrochemical,power generation and other industrial piping systems,Their suitability depends on more than nominal size: material grade,branch geometry,wall thickness,manufacturing quality and inspection requirements must all match the project specification,For engineers and purchasing teams,understanding how steel tees are manufactured and inspected helps identify the information that should be confirmed before an order is placed,
How to Store and Handle Oil Casing Before Installation

Oil casing needs proper protection from delivery through installation,Poor lifting practices,damaged thread protectors,unsuitable storage conditions or lost product identification can create problems before casing reaches the well,For drilling contractors,site managers and procurement teams,careful receiving,storage and handling help preserve product condition and prevent avoidable delays,