Product News

Hunan Great Steel Pipe Co., Ltd
steel tube manufacturer,coated steel pipe,steel tube provider

Lifetime of spiral steel pipe

Date: 2021-09-16
Lifetime of spiral steel pipe The lifetime of spiral steel pipe has relationship with decarburization, if the surface decarburize, surface strength and wear resistance will reduce the direct impact on the life of daily use. In the heat treatment process, it should be to try not to let the inner and outer walls and exposed to the air. The resulting medium spiral steel surface decarburization is mainly oxygen, water vapor and an oxidizing gas such as carbon dioxide, when the surfaces of the coil and the heated gas contacts the coil will cause oxidation and decarburization, therefore, the control of carbon dioxide in the furnace and the proportion of carbon monoxide is very important. In fact, the spiral steel forging furnace protective atmosphere of nitrogen was added is very effective, some of the nitrogen oxide gas can be dispersed to reduce the spiral steel decarburization. In order to extend the lifetime of spiral steel pipe, so the main direction of spiral welded pipe are: (1) the production of large diameter thick-walled tube in order to improve the ability to withstand increased pressure capacity mainly spiral welded pipe; (2) the development of new kinds of steel, smelting technology to improve the level of production and good quality spiral welded pipe welding, widely used to control rolling and rolling after the heat treatment process, in order to continuously improve the toughness and weldability of the pipe body; (3) to develop coated pipes, such as the inner wall of the tube coated with anti-corrosion layer, not only extend life and improve the smoothness of the inner wall, reducing fluid friction, reducing the volume of wax and dirt, reducing the number of pigging, reduce maintenance costs. (4) the design and production of new steel structures, such as the double spiral welded pipe, that is half the thickness of the wall into a double welded steel pipe, not only the intensity is higher than the same thickness of the single tube, and will not appear brittle failure. When using spiral welded pipe to follow certain standards for the production and processing technology, strict control of the production process, it has good quality and performance, play an important role in the use and promotion. Development of space spiral welded pipe is huge, the development of different industries and fields and promotion, effectively reducing the hassle of construction and building, to realize their full value. Post time: Sep-16-2021

Latest news list

  • Steel Elbow erosion,Steel Elbow wear,piping erosion,Steel Elbow wall thickness inspection,abrasive flow,Steel Elbow inspection
    Steel Elbows redirect flow in industrial piping systems,but this change in direction can make them vulnerable to localized erosion,When fluids carry sand,scale,catalyst particles or other solids,repeated particle impacts may gradually reduce the Steel Elbow wall thickness,Corrosion can accelerate the damage when the fluid is also chemically aggressive,Reducing Steel Elbow erosion starts with identifying the wear mechanism,reviewing operating conditions and tracking wall-thickness changes,The right solution depends on the process,material,fitting geometry and piping design,
  • steel reducer manufacturing,steel reducer quality control,steel reducer inspection,concentric reducer,eccentric reducer,steel pipe fitting production
    A steel reducer connects pipes of different diameters while providing a controlled transition in a piping system,Its dimensions,material properties and wall-thickness distribution affect installation,flow conditions and service reliability,For project buyers,understanding steel reducer manufacturing and quality control helps ensure that the supplied fittings match the piping design and applicable specifications,
  • steel pipe fitting leakage prevention,steel tee leakage,steel reducer connection,steel elbow joint
    Leakage at steel pipe fitting connections can cause unplanned shutdowns,fluid loss,maintenance costs and safety risks,A steel tee,reducer or elbow may meet its dimensional requirements,yet the connection can still leak because of poor fit-up,joining defects,damaged sealing surfaces or excessive operating loads,Preventing leakage requires attention to the complete piping system,from component selection and installation to inspection and operation,The correct approach depends on whether the connection is welded,flanged or threaded,
  • steel tee manufacturing,steel tee inspection,steel tee manufacturing process,steel tee quality control,butt welding tee
    Steel tees are butt-welding pipe fittings used to connect branch lines to a main pipeline,They are commonly specified in oil and gas,petrochemical,power generation and other industrial piping systems,Their suitability depends on more than nominal size: material grade,branch geometry,wall thickness,manufacturing quality and inspection requirements must all match the project specification,For engineers and purchasing teams,understanding how steel tees are manufactured and inspected helps identify the information that should be confirmed before an order is placed,
  • oil casing storage and handling,casing thread protection,casing receiving inspection,oil casing transportation
    Oil casing needs proper protection from delivery through installation,Poor lifting practices,damaged thread protectors,unsuitable storage conditions or lost product identification can create problems before casing reaches the well,For drilling contractors,site managers and procurement teams,careful receiving,storage and handling help preserve product condition and prevent avoidable delays,

Find what you need ?

close
We use cookies and other tracking technologies to improve your browsing experience on our website, to show you personalized content and targeted ads, to analyze our website traffic, and to understand where our visitors are coming from.