Surface processing of stainless steel
Date: 2020-09-29
Surface processing of stainless steel
Surface processing of stainless steel
There are roughly five basic types of surface processing that can be used for surface processing of stainless steel. They can be combined and used to transform more final products. The five categories are rolling surface processing, mechanical surface processing, chemical surface processing, texture surface processing, and color surface processing. There are also some special surface processing, but no matter which surface processing is specified, the following steps should be followed:
①Negotiate the required surface processing together with the manufacturer, and it is best to prepare a sample as the standard for mass production in the future.
②When using a large area (such as a composite board, you must ensure that the base coil or coil used is the same batch.
③In many construction applications, such as inside elevators, although the fingerprints can be wiped off, they are not beautiful. If you choose a cloth surface, it is not so obvious. Mirror stainless steel must not be used in these sensitive places.
④The production process should be considered when selecting the surface processing. For example, to remove the weld bead, the weld may have to be ground and the original surface processing must be restored. The tread plate is difficult or even unable to meet this requirement.
⑤For some surface processing, grinding, or polishing lines are directional, which is called unidirectional. If the lines are vertical instead of horizontal when used, dirt will not stick to it easily and it will be easy to clean.
⑥No matter what kind of finishing is used, it needs to increase the process steps, so it will increase the cost. Therefore, be careful when choosing the surface processing.
Post time: Sep-29-2020
English
Español
русский язык
Português
