Inconel alloy 600(UNS N06600) tube

Inconel alloy 600(UNS N06600) tube Inconel 600 is a solid solution strengthened alloy used for corrosion and high temperature resistance up to 2000 Degrees F. It is also nonmagnetic, possessing an excellent combination of high strength, both hot and cold work ability and resistance to ordinary forms of corrosion. A600 also shows high levels of resistance to stress-corrosion cracking, atmospheric corrosion, corrosion by high purity water, halogen, exhaust gases and most organic acids and inorganic acids. benefits including (1)Good oxidation resistance at high temperatures (2)Corrosion resistance to both organic and inorganic compounds (3)Resistance to chloride-ion stress corrosion cracking (4)Works well with most alkaline solutions and sulfur compounds (5)Lower rate of attack from chlorine or hydrogen chloride Specification of Inconel alloy 600(UNS N06600) tube Inconel Inconel alloy 600 Tube Chemical Composition Mechanical Characteristics Standards of Inconel 600 Tube Equivalent Grades Post time: Oct-13-2021 Types of Inconel 600 Tube Out diameter (OD) Wall thickness Length NB Sizes (in stock) 1/8” ~ 8” SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 Upto 6 Meters Inconel 600 Seamless Tube (Custom Sizes) 5.0mm ~ 203.2mm As per requirement Upto 6 Meters Inconel 600 Welded Tube (in Stock + Custom Sizes) 5.0mm ~ 1219.2mm 1.0 ~ 15.0 mm Upto 6 Meters Alloy C Mn Si S Cu Fe Ni Cr Inconel 600 0.15 max 1.00 max 0.50 max 0.015max 0.50 max 6.00 – 10.00 72.00 min 14.00 – 17.00 Grade Tensile Strength (MPa) Yield Strength 0.2% Proof (MPa) Elongation (% in 50mm) Hardness Hardness Grade Tensile Strength (MPa) Yield Strength 0.2% Proof (MPa) Elongation (% in 50mm) Rockwell B (HV) Brinell (HB) Inconel 600 550 245 30 182 179 SUMMARY STANDARDS STANDARD SPECIFICATION FOR SEAMLESS NICKEL AND NICKEL ALLOY CONDENSER AND HEAT-EXCHANGER TUBES ASTM B 163 SPECIFICATION FOR NICKEL-CHROMIUM-IRON ALLOYS (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, AND N06696), NICKEL-CHROMIUM-COBALT-MOLYBDENUM ALLOY (UNS N06617), AND NICKEL-IRON-CHROMIUM-TUNGSTEN ALLOY (UNS N06674) SEAMLESS PIPE AND TUBE ASTM B 167 STANDARD SPECIFICATION FOR WELDED NICKEL-CHROMIUM-IRON ALLOY (UNS N06600, UNS N06601, UNS N06603, UNS N06025, UNS N06045, UNS N06690, AND UNS N06693) TUBES ASTM B 516 STANDARD SPECIFICATION FOR WELDED NICKEL-CHROMIUM-IRON-ALLOY (UNS N06600, UNS N06603, UNS N06025, AND UNS N06045) PIPE ASTM B 517 STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN Inconel 600 2.4816 N06600 NCF 600 NA 13 МНЖМц 28-2,5-1,5 NC15FE11M NiCr15Fe